Installation Sheet

CF-KXX-110_ii_150901 Pg 4
5
MAINTENANCE
SPRAYHEAD
Caution: Place drain strainer or towel in sink drain to prevent parts
from falling down the drain.
 Use KEY (14) to remove SHELL (8a), SPRAY-
FACE (8b), aerator INSERT (8c) and WASHER
(8d)
 Rinse all parts with clean water to remove any
debris
 Replace all parts is opposite order as described
above
CARTRIDGE
Caution: Turn off HOT and COLD supply stops before
proceeding.
 Remove SETSCREW (10a) from HANDLE (10)
 Slide HANDLE (10) off
 Remove BONNET (11), PACKING NUT (12) and
slide CARTRIDGE (13) out
 Rinse CARTRIDGE (13) with clean water to
remove any debris
 Replace all parts is opposite order as described
above
Important: The PACKING NUT (12) must be securely tightened to
prevent leaking. The tightening torque shall be 70-90 lbs.-in. If
CARTRIDGE (13) is overtightened, CARTRIDGE (13) may not
function properly including possible damage to CARTRIDGE (13).
californiafaucets.com 5271 Argosy Ave. Huntington Beach, CA 92649 800-822-8855