Precision Reel Mowers OPERATOR’S MANUAL Models RL205H / RL207H RL205HC / RL207HC Evergreen Turf Equipment, LLC • 1028 4th St. SW, Bldg. A • Auburn, Washington 98001 • caltrimmer.
REEL MOWER OPERATOR’S MANUAL (RL205H/HC & RL207H/HC) Introduction Assembly & Set-up Read this information carefully to learn how to operate and maintain your product properly and to avoid injury and product damage. You are responsible for operating the product properly and safely. The unit has been carefully assembled with numerous adjustments and quality inspections performed by a team of trained factory technicians who take great pride in their work.
REEL MOWER OPERATOR’S MANUAL Assembly & Set-up (continued) 4. Mount the throttle lever to the backside of upper handle as shown: NOTE: Place the nuts on the backside. (RL205H/HC & RL207H/HC) 6. Mount the grass catcher bail to the grass catcher. Attach the bail ends to the grass catcher using the flat washers and clevis pins provided Note: The bail has slightly different lengths on each side, so align with the engine hook to determine the proper position.
REEL MOWER OPERATOR’S MANUAL Safety Instructions The following safety alert symbols are use in these instructions in conjunction with important safety messages related to the operation of the unit and potential hazards. As you familiarize yourself with the various features and functionality of this mower, please take note of the subjects and specific instructions that include these images… …WILL cause serious or fatal injury if the instructions are not followed.
REEL MOWER OPERATOR’S MANUAL Engine Operation A variety of engines are used on the California Trimmer Reel Mowers and their specific identification is provided as the last part of the overall unit’s model number. Example as follows: RL207H-GX120 (GX120 is the engine model no). Review the complete operation and safety instructions provided in the owner’s manual of the respective engine manufacturer – which is included in the information packet of this unit.
REEL MOWER OPERATOR’S MANUAL Mower Operation Operating Controls (continued) 5. Cutting Height Adjustment The cutting height is determined by the position of the adjustment handle and the front caster axle. (RL205H/HC & RL207H/HC) 1. Clothing and Safety Accessories Always wear safety glasses and appropriate clothing when operating mower. 2. Starting The clutch must be disengaged before starting the engine. The front caster wheel axle comes standard in the middle position.
REEL MOWER OPERATOR’S MANUAL Mower Operation (Continued) 6. Stopping (RL205H/HC & RL207H/HC) Over time with extended use, it may be necessary to adjust the idler arm to ensure the belt is fully engaged with the clutch lever. Use the cable adjustment near the clutch lever to remove any excess slack and enable the idler arm to sufficiently engage the belt.
REEL MOWER OPERATOR’S MANUAL Mower Maintenance (continued) (RL205H/HC & RL207H/HC) - Check shaft and reel drive chain... lubricate if needed. 2. CLUTCH SYSTEM (continued) - Replacing Belt: Remove cover, loosen belt guard and pivot away from belt. Remove belt from engine pulley, drive pulley and idler. - Check roller chain tension once each week. To tighten, raise the roller aligning the roller shaft parallel to the drive shaft. This puts the roller at the furthest point of movement.
REEL MOWER OPERATOR’S MANUAL 4. REEL BLADE / BED KNIFE Reel blades and bed knife edges are sharp. Wear gloves when making any adjustments. Never stand in front of the unit or attempt any adjustments while the engine is running. Remove the reel drive chain before making any adjustments. If you are unable to properly adjust these, consult your dealer before proceeding. Reel mowers, unlike rotary mowers, use a scissor action to cut grass.
REEL MOWER OPERATOR’S MANUAL (RL205H/HC & RL207H/HC) LIMITED WARRANTY STATEMENT Evergreen Turf Equipment, LLC hereby warrants California Trimmer Mowers manufactured by it to be free from defects in material or workmanship for a period of two years after purchase for non-commercial / non-rental consumer use. This warranty applies only to non-engine components and functions. The engine warranty coverage is provided by the respective manufacturer and is subject to their specific requirements and conditions.