User's Guide

User Guide
3.3.1 Connecting to the AC Power Adapter
Warning!
Do not use any other power supply adapter except the one that accompanies
the units. Use of other adapters could result in damage to the unit. To prevent
electrical shock, please do not open the cover.
To connect the power cable to the ONT, do the following:
1. Plug the circle two pin 12V DC power connector of power adapter to ONT
power
port.
2. Plug the input of power adapter into a live AC outlet.
3. Push the Power Switch button on the back of the ONT.
4. Verify that the POWER LED on the ONT is lit green indicating that local
power is on and voltage is good.
3.3.2 Connecting to an External UPS
NOTE: UPS power is sold separately. It is not included with this package.
Please contact Calix customer support for information.
8 5
4 1
G102409A
Figure 3 UPS PIN Numbering
Table 5 UPS PIN Signal Description
PIN Color Signal Description
1 Red +12 V DC 12 V DC input
2 White ON_BAT On battery
3
Blue BAT_MISSING Battery missing
8 220-00599 R10 | October, 2013