User's Guide

Lab Testing
This is a special section for FCC Certification technicians, it provides manual control
over the unit hardware that is usually operated automatically.!
!
Telephone Line Connection allows to manually connect or disconnect the telephone
side. May not work with the real phone line due to the protection mechanism built into
the firmware — once the unit detects that your telephone is off-hook, it will refuse any
attempt to cut off the line, so you never get your calls interrupted.!
Send Caller ID allows to manually send Caller ID directly to the line. The provided data
will be encoded and sent to the line regardless of the line state.!
WiFi Networks allows to connect to a different network at will.!
When operating the Lab Testing features, please wait for “Success” message
before making another action. This will help ensure that the process goes as
smooth as it can and the results are not messed up due to the race conditions
that could be potentially created by executing multiple actions in parallel. This
limitation exists only because the system normally operates the hardware
automatically and this section provides a manual override to those functions.
August 15, 2020
Call Control LLC
Page of 17 17