User manual

Pairing a second device. Onyx supports real time switching between two

connected devices. If you are currently connected to a phone, in order to pair

another device you will have to put your Onyx in discoverable mode. To do this,

simply push the power & volume control button once. The ice blue and red LEDs

will ash and you may now begin pairing the Onyx to your second device.

Switching between devices. Onyx will automatically switch between two

connected devices based on which device has requested an active audio

channel.

To disconnect your headset from your current device, you can:

Shut the Onyx off. To turn off the headset, press and hold the power & volume

control button until the red LED turns off.

Clear the pairing memory. To clear the pairing memory of the Onyx, press and

hold the multifunction button until the LED lights ice blue and red at the same

time. The Onyx will then enter a discoverable state.

Pairing and Disconnecting the Headset

callpod