User manual

Connecting Two Callpod

Headsets Together (2-way Communication Mode)

If you have two Callpod Bluetooth headsets, you can communicate headset-

to-headset in full duplex up to of 84,000 sq. ft. [7,800 sq. meters] area (in open

spaces). To connect two headsets together:

1. Make sure Headset A is in a discoverable state (ashing red and ice blue LED)

2. Power off Headset B

3. Power on Headset B while holding the multifunction button. The ice blue LED

will ash repeatedly.

After a few moments, Headset B will seek out the other Callpod headset and

automatically establish the connection. When the two Callpod Headsets are

connected, either party can speak in full duplex (at the same time with no voice

cancellation). To open or close the audio channel, press the multifunction button

once (do not hold the button down). By using the multifunction button to open

and close the channel, you will signicantly increase talk time versus having the

audio channel open continuously. Either user can open or close the channel.

Walkie-Talkie 2-Way Communications

callpod