User manual

Before using your Callpod

Onyx headset, you must fully charge the headset.

Charge the Onyx using the included wall adapter, car charger (sold separately),

USB cable or with the Chargepod

(sold separately). The Onyx is powered by

an internal lithium-ion rechargeable battery. Please do not attempt to remove

the battery from the case, as damage will occur to the headset and void your

warranty.

The red indicator light will turn on during charging. It may take a moment before

charging starts, and it may take up to 2 hours to fully charge the battery. When

charging is complete, the red LED will turn off.

If the battery becomes low on power while the headset is in use, you will hear a

short beep every 20 seconds.

Charging

callpod