User guide

OPERATING YOUR DEEP FRYER

Before Each Use

To avoid the risk of electrocution or severe disﬁguring electrical burns, do

not let children handle or put electrical cords or plugs in their mouths.

1. INSERT REMOVABLE BOWL – Place removable bowl into deep

fryer base, making sure that the basket hook is aligned to the front of

the deep fryer (same side as Calphalon logo).

2. ATTACH CONTROL ASSEMBLY TO BASE – Align the two tabs

on control assembly with outer two slots on fryer base. Slide control

assembly down as far as it will go, making sure that both tabs are in the

slots, and heating element is in bottom of bowl. (NOTE: The fryer will

only operate when both tabs are fully in place in the slots.)

3. FILL BOWL WITH OIL – The amount of oil used must be between the

minimum and maximum levels on the inside of the bowl. The fryer will

hold up to one gallon of oil. NEVER exceed the maximum level of oil.

4. ASSEMBLE BASKET HANDLE – The fry basket has a collapsible

handle. Make sure the collapsible handle is properly positioned.

The basket handle should be unfolded by rotating the handle and

engaging with the handle bracket attached to the basket. An audible

“click” will be heard when properly engaged. Ensure both the left and

right support arms of the handle are fully engaged with the notched

recesses in the handle bracket. The process should be reversed to

disengage the handle.

To aid in the engagement or disengagement of the handle, the user

may squeeze the left and right support arms of the handle to help

release the handle from the notched recesses of the handle bracket.

To avoid accidental burning or other injury, insure that the handle is ﬁrmly

attached to the basket. Make sure the handle bar’s pegs are in the basket

loops and the handle is secured around the metal plate.

CAUTION