User's Manual

FREQUENTLY ASKED QUESTIONS
I hear a slight clicking noise while the oven is operating. Is
this a malfunction? No, the convection oven is equipped with real time
temperature feedback. The LCD will display the current oven temperature
during the pre-heating phase in order to communicate the pre-heat progress
of the oven. Once the oven temperature stabilizes to the desired set point,
the oven will no longer display real time temperature feedback. The
temperature control of the oven is designed to be highly accurate in order
to achieve optimal cooking results. As a result, a slight clicking noise will
be heard periodically indicating that the oven is maintaining accurate
temperature control.
I am pressing the Convection button, but it is not illuminating.
The convection oven chimes three times, but the convection
mode doesn’t seem to activate. What am I doing wrong? You
may be trying to select Convection while using the Broil, Toast or Bagel
modes. The convection mode is not available (or needed) during these
settings. Simply continue setting the controls without the convection
mode selected.
The same is true of trying to select the Defrost option while using Broil or
Bake. This option is not available. So, if you press the Defrost button when
setting the oven to Bake or Broil, it will chime three times to alert you that this
setting is not available.
While setting the controls for a cooking cycle, it appears the
display went dark. Is this a malfunction? If the convection oven is
allowed to sit inactive for 3 minutes, it will go into Sleep mode. This could
happen if you set the cooking cycle but forget to touch the flashing Start/
Cancel button to begin cooking. To wake up the control panel and reset it,
touch any button.
30