Datasheet

ManualsBrandsCalrad Electronics Manualsaudio & home theatre40-998-HS

10-120

WIRELESS MICROPHONE RECEIVER

This professional receiver is designed with the latest wireless technology. The low drop-

out-free RF is excellent under adverse conditions. Audio performance is comparable to

more expensive systems. It has "TRUE DIVERSITY" reception for excellent RF

performance.

Specifications:

Operational Frequencies available* ........VHF 169-216 MHz Image Rejection .................................. Better than 60 dB

Working Range ......... Up to 300' under average conditions Reception Sensitivity....................... Better than 15dB uv

Distortion............................ Less than 1% (+/-15 KHz dev.) Reception Selectivity...................................... +/-60 KHz

Frequency Response 40Hz-15KHz (+/-3dB) Audio Output adjustment............... ..Min-30 dB, center 0dB,

Dynamic Range ..................................... Better than 100dB Audio Output Impedance.................. 2.2KW unbalanced

Signal to Noise Ratio ............................... Better than 95dB Power Requirements.............................. 12 Vdc-300mA

Noise Reduction ...... 2:1 Logarithmic compressor/expander

Size ...................................... (mm) 280 W X 120 D X 37 H

Oscillator/Modulator.......................... Crystal controlled/Fm Weight.............................................. 29 oz. (830 grams)

Color .......................................................................... Black

10-127

WIRELESS MICROPHONE SYSTEM

This professional quality VHF microphone system has a range of over 250 feet. With

two switchable frequencies for the cleanest sound at an affordable price. Has clip on

microphone. Ideal for camcorder use. A monitor earphone is included.

Specifications:

TRANSMITTER RECEIVER

Switchable Frequencies F1-169.445 MHz + F2-170.245 MHz Reception system ........ Double superheterodyne system

Sensitivity..................... 94dB SPL at +/- 2.5KHz deviation Frequencies........... F1 169.445 MHz + F2 170.245 MHz

Power supply................... one 9 volt battery (not included) Sensitivity............................................ 2uV at S/N 40dB

Power consumption................................................. 30 mA Power supply............... one 9 volt battery (not included)

Dimensions .......................................... 86 x 60 x 21.5 mm Power consumption.............................................. 25mA

Weight................................................................. 98 grams Monitor output ............................ voltage: 1v (load 30 W)

Microphone........................................... Electret condenser modfreq: 1 KHz<dev +/- 7 KHz

Color .......................................................................... Black Microphone output ............... voltage: 8mV (load 10K W)

impedence 300 W

Dimensions....................................... 86 x 60 x 21.5 mm

Weight ............................. 128 grams (including battery)

Accessories supplied....................................... Earphone

10-131

WIRELESS TRANSMITTER

This wireless transmitter has a clip on lapel microphone ideal for many uses. This

microphone has a range of over 200 feet. It has two switchable frequencies for the

clearest signal available. For use with the 10-120 receiver. Unit shipped with default

frequency of 171.905 MHz.

Specifications:

Operational Frequencies available. 169 - 216 MHz Dimensions ........................... 86 x 60 x 21.5 mm

Sensitivity ........ 94dB SPL @ +/- 2.5KHz deviation Weight .................................... 4 oz. (112 grams)

Power supply ....... one 9 volt battery (not included) Microphone ............................... Omni Directional

Power consumption ...................................... 30mA RF output power.................. 30Mw (50Mw max.)

Color............................................................... Black

*25 separate frequencies available.

CH MHz TV

A1 169.505 NONE

A3 171.045 NONE

A4* 171.905 NONE

B1 175.400 7

B2 178.225 7

B3 179.200 7

B4 176.425 7

CH MHz TV

B5 177.650 7

C1 181.400 8

C2 184.025 8

C3 185.125 8

C4 181.850 8

C5 182.550 8

D1 187.800 9

CH MHz TV

D2 188.200 9

D3 190.600 9

D4 191.300 9

D5 189.325 9

D6 190.075 9

E1 194.400 10

E2 195.425 10

CH MHz TV

E3 196.800 10

E4 197.325 10

E5 193.825 10

E6 195.975 10

*171.905MHz is the

default frequency.

CALRAD

10 Series - Wireless Microphones

Visit Calrad on the Web at: www.calrad.com

Summary of content (211 pages)

PAGE 1
CALRAD 10 Series - Wireless Microphones 10-120 WIRELESS MICROPHONE RECEIVER This professional receiver is designed with the latest wireless technology. The low dropout-free RF is excellent under adverse conditions. Audio performance is comparable to more expensive systems. It has "TRUE DIVERSITY" reception for excellent RF performance. Specifications: Operational Frequencies available* ........VHF 169-216 MHz Working Range ......... Up to 300' under average conditions Distortion............................
PAGE 2
CALRAD 10 Series - Wireless & Shotgun Microphones 10-130 WIRELESS MICROPHONE This is a quality microphone for use with the 10-120 receiver. It delivers a 200 foot range for use with videography and public speaking. Its clean crystal controlled output is equal to more expensive systems. Unit shipped with default frequency of 171.905 MHz. See page 1 for frequency chart. Specifications: Operational Frequencies available. 169 - 216 MHz Sensitivity ........ 94dB SPL at +/- 2.5 KHz deviation Power supply ...
PAGE 3
CALRAD 10 Series - Shotgun Microphones 10-10 SUPER CARDIOID SHOTGUN MIC 15” Super directive use. Can pick up objective sound clearly even in noisy environments. Shakeproof holder acts as a vibration damping mechanism and helps eliminate unwanted mechanical and motor noises. Impedance 600W (1 KHz). Complete with Case and Windscreen, 3.5 mm plug. Specifications: Type..................... Electret Condenser Microphone Directivity.................................... Super Directional Sensitivity ...........
PAGE 4
CALRAD 10 Series - Microphones 10-12 MINIATURE ELECTRET CONDENSER MICROPHONE This microphone is designed for all uses. ON/OFF switch enclosed on the belt clip for easy use. Designed for quality at a low cost. 15ft. cable is terminated with a 3.5 mm plug. 1” Specifications: Impedance ..................................... 1KW (at 1KHz) Power Supply ........ 1.5 volt AAA battery (included) Accessories ......... 3.5mm to 1/4" adapter, Battery, Tie Clasp, Wind Screen Color .....................................
PAGE 5
CALRAD 10 Series - Microphones & Accessories 10-19 DESKTOP MICROPHONE BASE Push On/Off talk switch with red L.E.D. indicator, requires 2 AAA batteries. Female XLR mic input to Male XLR output. Sturdy weighted base. Color is black. Front view 30-590 Chrome 30-590-BK Black Female XLR desktop mount in black or chrome, used for quick release style gooseneck mics. Removable solder type Female XLR. Mounts with 3 screws included. Base diameter. 1.75”, height 2”.
PAGE 6
CALRAD 10 Series - Isolation & Line Matching Transformers 10-76 DUAL IMPEDANCE LINE MATCHING TRANSFORMER 10-86 DUAL IMPEDANCE LINE MATCHING TRANSFORMER Comes with built-in High/Low switch. No wiring necessary. 1/4" Male mono plug with switchable input between 600W / 50KW to 600W XLR Female output. Comes with built-in High/Low switch. No wiring necessary. 1/4" Male mono plug with switchable input between 600W / 50KW to 600W XLR Male output with 6 inch cable.
PAGE 7
CALRAD 10 Series - Microphone Adapter Cables 10-140-5..............................5 ft. 10-140-10..........................10 ft. 10-140-15..........................15 ft. Female XLR to 1/4” mono plug. Black PVC jacketed cable, shielded. Above wired: Pin 1 & 3 - ground Pin 2 - hot. 10-141-5.............................5 ft. 10-141-10.........................10 ft. 10-141-15.........................15 ft. Male XLR to 1/4” mono plug. Black PVC jacketed cable, shielded.
PAGE 8
CALRAD 10 Series - Microphone & Adapter Cables 10-154-1 One Female XLR to two RCA Female inline jacks. Y cable, 1 ft. long. Uses flat style black PVC jacketed cable, shielded. Above wired: Pin 1-ground Pin 2-tip (hot) RCA jack Pin 3-tip (hot) RCA jack 10-155-1 Male XLR to two RCA Male plugs. Y cable, 1 ft. long. Uses flat style black PVC jacketed cable, shielded. Above wired: Pin 1-ground Pin 2-tip (hot) RCA plug Pin 3-tip (hot) RCA plug 10-156-1 Male XLR to two RCA Female inline jacks. Y cable, 1ft.
PAGE 9
CALRAD 10 Series - Microphone Accessories 3 10-83 ( /8" dia.) 2 PIN, ELECTRET CONDENSER MICROPHONE ELEMENTS .36” Miniature in size, excellent quality. Working voltage range from 2–10 Vdc. Output impedence is Low-Z. P.C. Mount plus Case Tab. 10-36 MICROPHONE GOOSENECKS 5/8" - 27 connecting thread, ends Male to Female. CHROME 10-36-6.................................... 6 inches 10-36-13 ................................. 13 inches 10-36-19 .................................
PAGE 10
CALRAD 10 Series - Microphone & Audio Accessories 10-58 VIDEO CAMERA MICROPHONE "Hot Shoe" Attachment 10-60 UNIVERSAL CLAMPTYPE MICROPHONE HOLDER 10-97 MICROPHONE CLIP HOLDER (Tie Clip) Fits 7/32" diameter microphones. Adjustable holder with brass insert. Holds microphones 5 3 /8"-1 /8" in diameter. For attaching microphone to video camera, movie camera, etc. Has knurled locking knob to SLIDE-IN MICROPHONE STAND hold tightly. HOLDERS Made of high impact black plastic. Tapered design.
PAGE 11
CALRAD 10 Series - Audio Accessories 80-575-H (HEADPHONE AMP) 80-575-M (MICROPHONE PRE-AMP) 80-575-L (LINE PRE-AMP) 80-575-P (PHONO PRE-AMP) Select from 4 standard stereo configurations. A few components are easily changed on the PC board for each preamp. The unit is available in a chassis, or completed circuit board with labeled black face plate. Includes DC power supply. Specify model and any specific specifications required for your application.
PAGE 12
CALRAD 10 Series - Audio Accessories 10-110 SPDIF* DIGITAL COAXIAL TO TOSLINK OPTICAL SIGNAL CONVERTER 10-119 TOSLINK OPTICAL TO SPDIF* DIGITAL COAXIAL SIGNAL CONVERTER Designed to bridge the gap between home theater components with differing input/output formats. These small but important adapters convert digital signals from coax to optical or vice- versa, ensuring compatibility between TosLink/optical components and those with coax connections. 10-110 = RCA input to TosLink Female output.
PAGE 13
CALRAD 15 Series - Headphones 15-118 STEREO-MONAURAL HEADPHONE High-velocity 57 mm mylar diaphragm drive units. Padded adjustable headband and earmuffs. Independent volume controls and stereo/mono switch with 1/4" phone plug. Specifications: Frequency Response ..... 20-20,000 Hz Impedance .................................... 32W Maximum Power Input............ 100 mW Color............................................. Black Acoustic System................... Closed back Sensitivity ......................
PAGE 14
CALRAD 15 Series - Headphones 15-110 STETHOSET-TYPE MINI STEREO HEADPHONE Stethoset type stereo headphones. Has two style ear cushions included. One is foam style and the other is soft rubber for use when conditions warrant. Supplied with a right angle 3.5 mm stereo plug and 1/4" stereo adapter. Specifications Frequency Response..... 20 - 20,000 Hz Impedance ...................................... 32W Power .......................................... 50mW Sensitivity ......................
PAGE 15
CALRAD 15 Series - Earphones & Headphone Junction Boxes 15-131 STEREO & MONAURAL HEADPHONE JUNCTION BOX Used with many school teaching systems and language labs, provides private listening for 8 individual persons. Individual volume control for each channel. Multiple units can be cascaded. Operates from any 8 W output source to 8W headphones. Supplied in black crackle finish, 9 ft connecting cable with standard 1/4"phone plug. Has 4 non-slip rubber feet.
PAGE 16
CALRAD 20 Series - Miniature Speakers MINIATURE SPEAKERS WITH CLEAR PLASTIC CONES With clear plastic cones for use as emitters, beepers, etc. Impedance. 8W 20-174 20-176 1.57" round, 7 /16" deep, 60-10KHz frequency response, 120 mw. Plastic frame. 20-224A 1.1" round, 1 /4" deep, 2" round, 11 /16" deep, 200-4,000 Hz frequency response, 2 watts power. Metal frame. 250-25KHz frequency response, 200 mw max power. Plastic frame.
PAGE 17
CALRAD 20 Series - Speakers 20-301 3" 45 ohm 2 watt SPEAKER Excellent quality, used for many types of radios and intercoms. Mylar waterproof cone. Specifications Impedance.............................. 45W Power ................................ 2 watts Size.............. 3” width, 13/16“ depth Cone ..................................... Paper 20-218 8" BACKGROUND MUSIC SPEAKER (with white ceiling grill) Ideal for ceilings and wall mounting. 3 Complete with 12 /4" dia.
PAGE 18
CALRAD 20 Series - Speakers & Paging Horns 20-211 8" PUBLIC ADDRESS & PAGING HORN Designed for all around use, either indoors or outdoors. Fully weatherproof. Locking metal swivel is provided for ease in mounting and adjustment. Outside edge has rubber sound dampening ring. Specifications: Power ..................................... 25 watts Frequency Response.. 300 Hz – 7 KHz Impedance ...................................... 8W Bell Size .................................. 8 inches round Color............
PAGE 19
CALRAD 20 Series - In-Wall Speakers 20-330, 20-335 & 20-337 2-WAY FLUSH-MOUNT, IN-WALL SPEAKERS Manufactured specifically for the demand of the HiFi sound enthusiast, our 3 Flush-Mount Speaker Systems are designed for easy installation in walls or ceilings where conventional box speakers are undesirable. Now you can enjoy incredible sound in any room of your home or office, without need of additional floor or shelf space. Finished in white, they can be painted to blend with any wall color.
PAGE 20
CALRAD 25 Series - Potentiometers Audio & Linear SUB-MINIATURE VOLUME CONTROLS Linear taper, extremely smooth for quiet operation. 1/2" dia. fits into 1/4” hole. Shaft 3/16" dia. Thread length 7/32", shaft length 9/16", 11/8" length overall. Supplied with mounting hardware. Specify resistance. .1watt, 20% tolerance, 300° rotation. (One per package.) Solderable terminals. *25-290 .......................... 2KW Linear Taper *25-294 ...................... 100KW Linear Taper *25-295 ......................
PAGE 21
CALRAD 25 Series - Controls SLIDE CONTROLS Modernize your equipment with the use of Slide Controls that have rugged construction and extra smooth action. 20% tolerance. Solderable terminals. 4 7/16" Mounting Centers, 4 11/16" x 1/2" x 5/8" Including Terminals 25-271.........................25 watt, 50KW Linear Taper 25-276 ..............................0.5 watt, 50KW Audio Taper 25-275............................5 watt, 10KW Audio Taper 25-277...............................
PAGE 22
CALRAD 25 Series - Speaker Attenuators *WIRING DIAGRAM FOR 25-341, 25-342A, 25-352, 25-353, 25-452, 25-453 (-) Commercial or Residential Use 25-351 10 WATT 70 VOLT AUDIO LINE ATTENUATOR -MONO 25-351A 10 WATT 8W AUDIO LINE ATTENUATOR -MONO Flush mount auto transformer type. Fits into standard single gang box or ring. Excellent for use in home, paging and background music systems. Features a 10-position volume selector switch with 3dB step attenuation and a positive off position.
PAGE 23
CALRAD 25 Series - Speaker Attenuators & Accessories 25-361 8 OHM STEREO MULTIPLE SPEAKER ATTENUATOR 12 step design for a total attenuation of 42dB. Matches impedance to amplifier and allows 1 to 16 attenuators to be used with one amplifier. Selectable index washer under knob for setting attenuation. Power handling 100 watts, 200 watts peak, 8W output. White insert and knob with pointer. Accepts up to 14 awg cable. Removeable terminal blocks, 2.7” deep.
PAGE 24
CALRAD 25 Series - Desktop Volume Controls & Transformers 25-345 60 WATT STEREO DESKTOP LOUDSPEAKER CONTROL CENTER Individual volume controls for each speaker L+R. Input\Output through 4MM gold plated terminals. Can be used with CALRAD 30-605 banana plugs. Accepts 12-18 gauge cable. Sturdy metal chassis with black finish. Dimensions: W = 5.5” X H = 3.14” X D = 3.75”. 25-346 60 WATT STEREO DESKTOP LOUDSPEAKER CONTROL Heavy duty rocker switches turns On\Off main, remote speakers.
PAGE 25
CALRAD 28 Series - Designer Style Wall Plates 28-100-P GOLD PLATED 1 PAIR BINDING POSTS Plastic insert plate. Standard 5 way binding posts, independently isolated terminals, with solderable leads. Insert color is white. Includes mounting hardware. 28-101-P GOLD PLATED 2 PAIR BINDING POSTS Plastic insert plate. Double standard 5 way binding posts, independently isolated terminals, with solderable leads. Insert color is white. With Red & black binding posts.
PAGE 26
CALRAD 28 Series - Designer Style Wall Plates 28-103-P GOLD PLATED 2 PAIR BANANA JACKS Plastic insert plate. Recessed banana jacks with isolated terminal, with solderable leads. Insert color is white. Red/black terminals. Includes mounting hardware. 28-123 FOUR PAIR BANANA JACKS Metal insert plate. Insert color is white. Red/black terminals. Includes mounting hardware. 28-104-P GOLD PLATED SINGLE RCA JACK Plastic insert plate. Standard black RCA type jack with solderable leads. Insert color is white.
PAGE 27
CALRAD 28 series - Designer style Wall plates 28-125 siNgLe 50 ohm goLD pLAteD BNC FemALe JACk Gold Plated BNC jack in a plastic insert plate. Color is white. Solderable leads. Includes mounting hardware. 28-126 DUAL 50 ohm goLD pLAteD BNC FemALe JACks Gold Plated BNC jacks in a plastic insert plate. Color is white. Solderable leads. Includes mounting hardware. 28-117-p 1/4” iNCh goLD pLAteD steReo JACk Plastic insert plate. Insert color is white. Solderable leads. Includes mounting hardware.
PAGE 28
CALRAD 28 series - Designer style Wall plates 28-161 siNgLe high DeNsitY DB-15 FeeD-thRU JACk 28-159 3.5mm FeeDthRU JACk White plastic insert plate with a single 3.5mm Female to Female stereo jack nickel plated connector. Includes mounting hardware. White plastic insert with a single HD-DB-15 feed-thru jack. Available in nickel or gold plated versions. Includes mounting hardware. 28-161.......................Nickel 28-161g......................
PAGE 29
CALRAD 28 series - Designer style Wall plates 28-161-t soLDeRLess VgA White plastic insert plate with one 15 pin VGA Female to 10 position terminal block with screws. Nickel plated. Includes 2 7/16” holes. Interior depth 1 1/8”. Block is marked with VGA connection information. Easy to use. hDtV hDtV Small Slotted Screw Driver Required 28-163p DVi-i to DVi-i FeeD-thRU White plastic insert plate with one DVI-I Female to Female feedthru. Nickel plated. Includes mounting hardware Interior depth 0.4 inches.
PAGE 30
CALRAD 28 series - Designer style Wall plates 28-166k keYstoNe hDmi 1.3B FemALe to FemALe iNseRt hDtV Fits in a standard keystone cut out, 1.3b Certified Female HDMI on front and back Keystone is rotated 90 degrees to insert into any standard keystone face plate, Gold-plated Connectors. wall plate not included. Overall depth 1", Color: White hDtV hDtV hDtV 40-hW01 hDmi AND iR WALL pLAte BALUN hDtV HDMI 1.3 and IR wall plate balun system over two Cat5e, Cat 6 cables.
PAGE 31
CALRAD 28 series - Designer style Wall plates 28-190 BLANk keYstoNe CUtoUt With tWo 3/8” hoLes White plastic blank insert, with 1 - blank keystone, 2 - Hex nut cutouts for .375” connectors. Hex nut size = .445” 28-180 heX hoLe DesigNeR iNseRts White and Ivory plastic insert plates available in 1, 2, 3, 4, 6, and 8 hole configurations. Will accept any 3/8” audio & video connectors, RCA, RF, etc. Works with Calrad 30 and 75 Series 3/8” feed-thru connectors.
PAGE 32
CALRAD 28 series - Designer style Wall plates 28-120 steReo A+B speAkeR sWitCh White plastic insert plate. Power rating is 50 watts. Common ground switching. Includes mounting hardware. single Designer style speaker selector inserts 28-128 heADphoNe JACk AND speAkeR sWitCh White plastic insert plate. Push switch and 1/4” Stereo headphone jack. 100 watts cont. / 150 watts peak. Includes mounting hardware. Input and output terminals on the back.
PAGE 33
CALRAD 28 series - Designer style Wall plates 28-145 CoLoReD DesigNeR stYLe iNseRt CoVeRs Designed to be used with the Calrad 25-360, 25-361and 25-362 attenuators. Easy to remove designer style insert comes with matching colored knob. 28-145-AL............Almond 28-145-Bk...............Black 28-145-Wh.............White 28-145-iV.................Ivory White oR iVoRY kNoBs AND pLAtes For use with 25-351, 25351A, 25-339, 25-339A, 25357, and 25-357A. Plates have numbers 0-10.
PAGE 34
CALRAD 28-70 series - Wall mounting Brackets 28-LV2Rp DUAL gANg CABLe DistRiBUtioN moUNtiNg BRACket 70-558 siNgLe gANg 70-559 DUAL gANg Dual gang low voltage bulk cable mounting bracket designed for easy installation. Can be installed quickly using a 4.5” hole saw in 1/4" to 1 1/2" dry wall. Can also be used with our 28 series designer style wall plates.
PAGE 35
CALRAD 30 series - Audio Connectors LoCkiNg RCA pLUgs Available with the following colored iD bands. please specify when ordering Black...........Bk Blue.............BU green..........gN Red..............RD White..........Wh Yellow..........YL Small Slotted Screw Driver Required Twist to Lock Barrel 30-607-Bk 30-607-RD Locking RCA plug for up to 8 mm wire. Locking black chrome barrel comes with black or red color ID band. Teflon insulator. .35” cable opening. 30-289 30-607s-CoLoR for 6mm cable. .
PAGE 36
CALRAD 30 series - Audio Connectors Technical drawings and specifications are available for these connectors. Please ask your Calrad sales representative for details. Cable tie holes 30-302-CoLoR 30-387 Gold plated RCA Audio 30-387-Nk Nickel Gold & Video Plug with Heavy duty gold or teflon insulator nickel RCA Audio for 6-8mm cable. Black Plug for use on cable chrome barrel with easy grip knurling .35” up to RG59 coax. cable opening. Spring strain relief. .28” cable opening.
PAGE 37
CALRAD 30 series- pro Audio & home theater RCA Connectors 30-384 Right angle RCA Audio Plug. Solderless connector with cable clamp. .19” cable opening. 30-428-CoLoR 30-300-CoLoR 30-425-Bk Black RCA chassis mount Nickel 30-425-RD Red Audio Jack. Gold RCA-type mini 30-428g-CoLoR plated with teflon Audio Jack with hex Gold nut grip, hex nut insulator mount.Fits Nickel plated RCA and solder lug. 5/16" hole. Bushing Audio Jack with hex nut Single hole mount. and solder lug. Single length .43” hole mount.
PAGE 38
CALRAD 30 series - Connectors Technical drawings and specifications are available for these connectors. Please ask your Calrad sales representative for details. Locking sVhs plug 30-618 (4 pin) 30-618-6 (6 pin) 30-618-8 (8 pin) SVHS inline Female jack. Solder type connector. Accepts 5-7mm cable. Black chrome body with gold plated connector. 30-619 (4 pin) For use with 8mm cable. 30-320 ......3-pin 30-322 ......4-pin 30-324 ......5-pin 30-326 ......6-pin 30-328 ......7-pin 30-330 ......
PAGE 39
CALRAD 30 series - Connectors Technical drawings and specifications are available for these connectors. Please ask your Calrad sales representative for details. 30-487 Stereo 30-487A Mono Metal 3.5 mm mono 30-487g Gold, Stereo 30-414 Mono 30-417 Stereo inline Female Audio Jack .16” cable opening with strain relief. Mini inline 3.5 mm mono or stereo Audio Jack, plastic handle w/strain relief. .19” cable opening. 30-492 Mini 3 circuit shielded stereo Audio Jack. 3.
PAGE 40
CALRAD 30 series - Connectors Technical drawings and specifications are available for these connectors. Please ask your Calrad sales representative for details. 30-491 Mini 3 circuit stereo Audio Jack. 3.5 mm open circuit, PC-type. 30-364 PC mount 3.5mm mono miniature Audio Jack. Normally closed circuit. PCB footprint available upon request. 30-477 30-422 30-365 30-478 3.5mm mini stereo Audio Jack,. Black PVC plastic construction, perfect for mounting in tight places. Size: 33”(L) x .35”(W) x .
PAGE 41
CALRAD 30 series - Connectors Technical drawings and specifications are available for these connectors. Please ask your Calrad sales representative for details. 30-412A Closed Circuit 1/4" Mono Audio Jack. .35” x .29” bushing. .36” hole size, will work with standard .375” hole. 30-337 Coax AC/DC power plug 2.35mm O.D., .7mm I.D. .17” cable opening with strain relief. 30-333 2.1mm 30-334 2.5mm 41 30-395 Open Circuit. 30-396 1/4” Audio Jack. Closed Circuit 2-Conductor. 3/8” bushing, Mounts in .
PAGE 42
CALRAD 30 series - Connectors 30-310 2.1mm 30-311 2.5mm. Chassis mount coax power jack. Insulated housing mounts in 5 /16” hole. N/C switch. 5.5mm O.D. 30-379 3.0mm I.D. 6.3mm O.D. chassis mount coax power jack. For 7/16” dia. hole in panels up to 3/16” thick. 30-349 Power plug converter 3.5mm plug to 2.5mm jack. 30-442 Black 30-443 Red Insulated banana plug, 1" molded bakelite handle, .2" cable opening. 30-355 Right angle coax power plug. .3mm I.D., 3.5mm O.D. with solder terminals. .
PAGE 43
CALRAD 30 series - Connectors Technical drawings and specifications are available for these connectors. Please ask your Calrad sales representative for details. Overall length 1.17” 30-440 Red 30-441 Black Dual banana plug, gold plated. .24” cable opening. 0.75” centers. 30-613-Bk Black 30-613-RD Red 30-613 Red&Black Spade terminal, gold plated crimp on connector, with P.V.C. cover, black or red. .15” to .3” cable opening.
PAGE 44
CALRAD 30 series - Connectors Technical drawings and specifications are available for these connectors. Please ask your Calrad sales representative for details. .26” cable opening. .26” cable opening.
PAGE 45
CALRAD 30 series - Connectors 30-475 Coax adaptor plug. Adapts PL 259 type to 3.5 mm plug. 30-465 Coax cable connector plug. PL-259 30-469 Coax universal jack adaptor. Adapts PL 259 to Motorola-type auto antenna plug or RCA-type phone plug. 30-434 Mic connector. Bright chrome plated. Knurled collar. .21” cable opening. 30-470 30-471 Coax right angle adapter SO-239 to PL-259. Coax "T" connector adapts 2 Females to one Male. 30-472 Coax double Female connector.
PAGE 46
CALRAD 30 series - Connectors on/off switch 30-517 Isolated plastic Female XLR with protective cover. 3-pin Female XLR mounts in 15/16” hole and requires a special cut out in order to mount. 30-522-sL-4 4 Pin 30-522-sL-5 5 Pin 30-523-sL-4 4 or 5 pin Silver Male XLR chassis plug mounts in .75” hole size. 30-523-Bk-4 4 pin Silver 4 Pin Black 30-523-sL-5 5 pin Silver 4 or 5 pin Female XLR chassis jack mounts in 15 /16” hole size. 30-638 3-Pin XLR inline Female with labeled on/off switch.
PAGE 47
CALRAD 30 Series -Connectors DAtA 30-582 DB9 Female to DB 9 Female gender changer mini version. 30-582-mF DB9 Male to DB 9 Female gender change 30-577 25-way "D" connector socket to 25-way "D" connector socket mini version. ViDeo ViDeo PC or HDTV PC or HDTV 30-587 Nickel 30-587g Gold 30-588 30-588g gold 30-584-m 15 pin gender changer. Male-Male. 15-pin Female to 15-pin Male to Male gender changer. Female gender changer.
PAGE 48
CALRAD 35 series - Adapters Small Slotted Screw Driver Required 35-498Bh 4 pin 35-498Bh-6 6 pin 35-498Bh-8 8 pin 35-498k-s Cable Tie Holes Bulkhead mini-din connector w/ 2 nut mounting. Panel mount 4 pin SVHS Female-Female. Mounts in 1/2” single “D” hole 35-498g-Bh Gold 4 pin version 35-498g-Bh-6 Gold 6 pin version Colored washers 35-498 4 pin 35-498-6 6 pin 35-498-8 8 pin Bulkhead SVHS connector with 2 nut mounting. Panel mount 4 pin SVHS Female to Female. Mounts in 1/2” double “D” hole.
PAGE 49
CALRAD 35 series - XLR Adapters 35-456 35-457 3 Pin XLR Female jack to 1/4" stereo plug. 3 Pin XLR Male plug to 1/4" stereo plug. 35-462 35-452 35-453 35-451 3 Pin XLR Female jack to 1/4" mono plug. 3 Pin XLR Male plug to 1/4" mono plug. 3 Pin XLR Male plug to 1/4" stereo jack. 35-450 3 Pin XLR Male plug to 1/4" mono jack. 3 Pin XLR Female jack to 1/4" mono jack. 35-455 35-454 35-461 35-460 35-459 35-458 3 Pin XLR Male plug to RCA plug. 3 Pin XLR Female jack to RCA type plug.
PAGE 50
CALRAD 35 series - DVi, hDmi, VgA Adapters 35-718 35-713-A 35-714 35-714A HDMI Female to Female inline Coupler with Gold contacts. HDMI Female to Male right angle adapter.Up 90 degrees Gold contacts. HDMI Female to Male right angle adapter. Down 270 degrees. Gold contacts. 35-711A 35-706 35-718,35-718A hDmi Right Angle Adapter Cables The 35-718 Series Adapters provide a low profile cable exit solution for tight spaces Behind video displays, A/V receivers, switching and amplifier devices.
PAGE 51
CALRAD 35 series - Audio Video Adapters Display port hDmi 35-723 35-729 ‘D’ Style panel mount Display port panel HDMI female-female mount feed-thru female feed-thru. Gold plated to female jack. Mounts contacts. Mounts in a in a standard DB9 .917” hole. cutout. Gold plated contacts, includes mounting hardware. Composite Video-Audio 35-730 Fixed 3db Component video attenuators. Provides proper video attenuation for large distributed video applications.
PAGE 52
CALRAD 35 series - Audio Adapters 35-487 35-484A 35-566 35-517-Rt Right angle stereo 3.5 mm jack to 3.5 mm stereo plug. Right angle stereo 1/4" plug to stereo 3.5 mm jack. RCA-type jack to 1/4” mono plug. Right angle. 1/4" mono plug to right angle RCA jack, teflon insulator. Gold plated. 35-445 Mono 35-446 Stereo 35-580 Mono 35-580A Stereo 35-517 Nickel 35-517g Gold 35-549 Gold 35-549-Nk Nickel 1/4” Male to Male mono or stereo pin plug adapter.
PAGE 53
CALRAD 35 series - Audio Adapters 35-538 Nickel 35-538-p Plastic RCA-type pin jack to miniature 3.5 mm mono plug. Nickel plated, shielded. 35-552A 3.5 mm mono plug to 3.5 mm stereo mini jack. 35-539 Nickel 35-539-p Plastic 3.5 mm mono jack to RCA-type pin plug. Shielded. Nickel plated. 35-512 3.5 mm stereo plug to RCA Female jack. 35-582 Plastic 35-582-Nk Nickel 35-583 2.5 mm mono plug to RCA jack. 35-518 Plastic 35-518-m Nickel 35-565 35-552 3.5 mm mono jack to 3.5 mm stereo plug. 3.
PAGE 54
CALRAD 35 series - Audio Adapters 35-530 35-526 35-578 Two RCA plugs to one RCA jack, shielded. 10” long. RCA plug to one RCA plug and one RCA jack, shielded. 10” long. One RCA jack to dual RCA-type jacks, shielded. 10” long. 35-529 3.5mm mono plug to two RCA Male plugs, shielded. 12” long. steReo miNi "Y" ADApteR CABLe 3.5 mm stereo plug to 2 molded RCA nickelplated Male plugs (black). Shielded cable. 55-899-3.............. 3 ft. 55-899-6.............. 6 ft. 55-899-12........... 12 ft. 55-899-25...
PAGE 55
CALRAD 35 series - Audio Y Cables, passive Video Baluns 35-570 35-571 35-579B 1/4" mono plug to two 1/4" mono jacks, shielded. 12” long. Two 1/4" mono plugs to one 1/4" mono jack, shielded. 11 “ long. Two mono 1/4” plugs to one 1/4” stereo jack, shielded. 10” long. 35-532 35-534 Stereo 1/4” plug to two RCA plugs, shielded. 10” long. Stereo 1/4” plug to two RCA jacks, shielded. 10” long. 55-902 5 ft. version. 35-593 One 1/4” mono jack to two RCA plugs, shielded. 10” long.
PAGE 56
CALRAD 40 series - passive Composite-Component Baluns supports 480i 95-1040 Composite ViDeo BALUN sYstem Transmit composite video and L+R analog audio up to 1000’ over UTP cat5e or cat6 cable. 3 x RCA female jacks to RJ45 female jack. Units sold individually, 2 pieces required. Non-directional signal use. Size: Length 3.5” x Width 2.2” x Height 1”. tecnical Note: Using adapters, the composite video jack can be used to deliver IR as well. Use Calrad 75- adapter for CCTV use.
PAGE 57
CALRAD 40 series- hDtV A\V Component Distribution Amplifiers 40-YD02A 1 X 2 hDtV AUDio-ViDeo DistRiBUtioN AmpLiFieR The 40-YD02A 1 x 2 component video amplifier with stereo audio allows you to distribute low-noise, low-distortion HDTV component video and analog audio signals to four destinations.
PAGE 58
CALRAD 40 series - Component Distribution Amplifiers 40-844m 1 X 4 hDtV DistRiBUtioN AmpLiFieR 1X4 Component Video and Stereo Audio Distribution Amplifier. 300MHz for HDTV component video and stereo L+R audio. AC adapter included. specifications: Type of Video:...............HDTV Component DA Video Input/Output: .......................+1Vpp. 75W Audio Input/Output: .......... Stereo (R+L) 40KW Terminals Input/Output ......... RCA connectors Video Input: ..Component Video YPbPr, YCbCr Audio Input: ........
PAGE 59
CALRAD 40 series - Component Video switchers 40-816m 4 X 2 hDtV CompoNeNt RoUtiNg sWitCheR IR Remote/Manual controlled 4 inputs to 2 outputs component video switcher with audio combined. Comes with remote control (batteries included) A/V input cable and DC power supply. Discrete IR Switching Control: Via Infra Red Remote Control or Manually from the front panel buttons. iR Remote specifications: iNpUt: Video In put:.....Component Video (RCAs) x 12 +1Vpp, 75W Audio Input: ......................
PAGE 60
CALRAD 40 series - Component Video switchers 40-5526 4X2 CompoNeNt ViDeo mAtRiX sWitCheR Capable of switching HDTV Component Video, PCM, Optical and Stereo Audio signals between four sources and two displays with compatible inputs. A maximum bandwidth of 325MHz will support HDTV resolutions of up to 1080P. Because it is a matrix switcher, it allows any input to be routed to any output; or the same input to be routed to all outputs.
PAGE 61
CALRAD 40 series - VgA, hDmi, Component Video Converters/scalers 40-281h CompoNeNt ViDeo to hDmi CoNVeRteR Rear View Front View Convert Y, Pb, Pr component video and analog or digital audio to HDMI 1.2 or DVI 1.0. Supports 480I, 480P, 720P, 1080I and 1080P. The 40-281H has RCA jacks for Component video inputs, PCM digital audio and 3.5 mm stereo audio. The audio input select switch allows you to switch between analog or digital audio in. 5 Volt DC power supply included.
PAGE 62
CALRAD 40 series - VgA, Component, Composite Video Converter/scalers 40-482 VgA\ CompoNeNt ViDeo to hDmi CoNVeRteR Includes 3 ft. VGAM-M video and 3.5mm M-M audio cables. Front panel L.E.D. power indicator. If you have PC or Laptop with VGA output, or you have a device like PSP, DVD, Wii, X-box with component output, and you wish to connect it to an HDTV. The 40-482 has a builtin scaler that up-scales a standard analog VGA signal or Component Video with audio to a single HDMI output.
PAGE 63
CALRAD 40 series - Component Video Converters/Baluns/Adapters 40-888 VgA, hDtV CompoNeNt ViDeo to s-ViDeo, Composite ViDeo, 480i CompoNeNt ViDeo CoNVeRteR/sCALeR Rs232-iR Controlable The 40-888 allows you to convert VGA or 480i component video to composite video or S-Video. Supports NTSC 3.58, NTSC 4.43, Pal-M, Pal-N or Secam formats. Switchable component video or VGA inputs. Manual push button or IR remote controlled. RS232 for PC control.
PAGE 64
CALRAD 40 series - Baluns/Composite Video Amplifiers 40-DA01 BALANCeD pAssiVe sigNAL CoNVeRteR 40-DA02 BALANCeD pAssiVe sigNAL CoNVeRteR With 4” WiRe pigtAiL Small Slotted Screw Driver Required 40-DA01 40-DA01 40-DA02 40-DA02 Passive bi-directional signal design using UTP Cat5e or Cat6 cable pair. Use for Audio\Video\Component\IR signals. Cable Distance: Analog Audio, 1000 ft. Digital Audio, 300 ft. IR Signals, 300 ft. Composite video, 1000 ft., High Definition 480P - 300 ft., 720P - 200 ft.
PAGE 65
CALRAD 40 series - Composite Video Amplifiers Front View Rear View 40-809-8, 8 port Audio\Video DistRiBUtioN AmpLiFieR 1 input to 8 buffered and isolated outputs. L.E.D.power indicator. Extends audio and composite video up to over 200’. RCA jacks IN\OUT. This product is perfect for multi-TV demo’s, CCD camera feeds, and home theater systems. Front panel power switch, AC adapter included. specifications: iNpUt: Type of Video.............Composite video (V/C) x 1 Video Input..................... +0.
PAGE 66
CALRAD 40 series - Composite Video Amplifiers 40-839 1 X 8 s-ViDeo DistRiBUtioN AmpLiFieR S-Video distribution amplifier with 1 SVHS Female input to 8 SVHS Female outputs. This unit can be used for composite video signals from a DVD player or S -Video VCR. AC adapter included. specifications: iNpUt: Video System: NTSC/PAL S-Video (Y/C) Video Input: .........0.50 Vpp. ~2Vpp, 75W Input Terminal:S-VHS Mini-Din 4 Pin x 1 FRoNt VieW oUtpUt; Video System: NTSC/PAL S-Video (Y/C) Video Ouput: ...................
PAGE 67
CALRAD 40 series - Composite-sVhs Video switchers 40-841m 4 X 2 Composite/s-ViDeo mAtRiX sWitCheR Remote/Manual controlled 4 inputs to 2 outputs composite/S-Video Matrix switchers with audio combined. Comes with IR remote control (batteries included) A/V input cable and DC power supply. Composite/S-Video bandwidth up to 100 Mhz. Switching Control: Via Infra Red Remote Control or front panel manual push buttons. Individual L.E.D. indicators display Output-A, Output-B input selections.
PAGE 68
CALRAD 40 series - Composite-sVhs Video switchers 40-830m 4 X 4 AUDio\ViDeo Composite mAtRiX sWitCheR IR Remote or Manual controlled 4 input to 4 output RCA composite Video Matrix switcher with audio combined. Comes with remote control (batteries included) A\V input cable and AC power adapter. RCA Composite Video bandwidth up to 100 MHz. specifications: iNpUt: Video Input ..............Composite Video x 4 Video Bandwidth......................>100MHz +1Vpp, 75W Video Distortion ............<1.
PAGE 69
CALRAD 40 series - ip Video products 40-CDL-160eth etheRNet AND UsB to hDmi CoNVeRteR Front View The Ethernet and USB to HDMI Converter allows you to use a TV as your laptop/desktops primary display. Simply connect the TV to the device and then plug the device into the Ethernet network and your TV will instantly become the PC's principal display. This Converter also has two USB ports, for a mouse and keyboard, allowing you to control any networked computer.
PAGE 70
CALRAD 40 series - Audio-Video/speaker selectors/Audio Converters 40-851VC siX ChANNeL AUtoFoRmeR BAseD steReo speAkeR seLeCtoR With VoLUme CoNtRoLs Rating per channel 100W, RMS continuous selectable A/B amplifier input. Multipleposition volume control: 10 position switch - max attenuation 42dB heavy duty. Push type connectors accept up to 12 awg. cable. Independent channel grounds for safe connection to all amplifiers (including bridged or floating ground).
PAGE 71
CALRAD 40 series - Analog/Digital Audio Converters 40-DCt-4 ANALog steReo to DigitAL CoNVeRteR (LpCm) LiNeAR pULse CoDe moDULAtioN 48Khz, 96Khz Sample Rate Switch The 40-DCT-4 converts aanalogl audio signal source to a digital coax jack or optical toslink jack and converts it to a PCM digital audio signal, coax, toslink output jacks. Inputs: RCA L+R audio jacks. Outputs: RCA coax jack, optical toslink jacks.
PAGE 72
CALRAD 40 series - Converters/Baluns 40-CW01A Designer style Composite Video + stereo Audio Wallplate Balun 1x RJ45 Jacks 40-VW01 VGA over Cat5e extender on a designer style insert. Passive balun wall plate allows you to send VGA up to 300 feet over a single Cat5e UTP cable. Supports resolutions up to 1280 X 1024 No power required. Dimensions: 11.5mm X 71mm. Sold in pairs. Composite video and stereo audio over Cat5e extender on a designer style insert.
PAGE 73
CALRAD 40 series - km, kVm / UsB Baluns 40-km01 pC ps2 moUse AND keYBoARD oVeR CAt5e \ CAt6 BALUN Receiver The 40-KM01 PS 2 mouse and keyboard balun system provides a low cost solution for extending the transmission signals of the mouse and keyboard over Cat5e or Cat 6 UTP cable up to 300 feet. Passive design requires no power. Ideal for corporate conference rooms and schools. Receiver dimensions: L- 2.6” x W-1.7” x H-1”, transmitter dimensions: L x 2” x W- .96” x H-.82 ”, Color: Black. Sold in pairs.
PAGE 74
CALRAD 40 series DVi \ hDmi Amplifiers & splitters 40-1030 hDCp CompLiANt DVi AmpLiFieR CAsCADe UNits AND DeLiVeR sigNALs Up to 150 Ft. WoRks With pC oR hDtV DeViCes specifications: Input/Output Connectors.......................DVI Female Jacks Rear and Front Bandwidth..HDCP....... Compliant, 480i, 480P, 720P, 1080i (25 - 165 Mhz) Maximum Resolution................................................. 1600 X 1200 at 60 Hz Distance. (Using High Quality Cables) Total 100 -120 ft.Cascade to 150 ft.
PAGE 75
CALRAD 40 series - DVi Converters osD setup menu 40-881 DVi-D to VgA CoNVeRteR \ sCALeR The 40-881 is a Digital DVI-D to analog VGA converter and scaler. DVI-D input to HDDB15 VGA output. Input resolution is automatically detected while the output resolution and refresh rate can be selected via the OSD menu. The 40881 has non-volatile memory and memorizes all your settings before the power is turned off and recalls those settings the next time the power is turned on.
PAGE 76
CALRAD 28-35 series - DVi/hDmi Adapters 28-163p DVi-i to DVi-i FeeD-thRU 28-163-pC White plastic insert plate with DVI Female jacks on both sides. Jacks are mounted on offset circuit board for a low profile front and back. Gold plated connectors insure excellent contact and long life. Red L.E.D. 5V signal signal indicator.Overall depth 1” front to back. White plastic designer style insert plate with one DVI-I Female to Female feedthru. Nickel plated. Includes mounting hardware.
PAGE 77
CALRAD 40 series - hDmi Baluns, extenders 40-1072m hDmi 1.3, 3D eXteNDeR oVeR tWo CAt5e \ CAt6 CABLes Compact HDMI extender is designed to deliver HDMI 1.3 signal sources over 2x Cat 5e or Cat 6 UTP cables that can deviver HDTV signals to plasma, LCD and projection displays. All metal case with ear mounts. These devices are a perfect solution for replacing costly standard HDMI cables that are difficult to route thru walls and cabinets. A small class 2 power supply is required on the receiver side.
PAGE 78
CALRAD 40 seRies - hDmi Converters-scalers 40-1096 2 input hDmi 1.3B, 1080p-3D oVeR A siNgLe CoAX CABLe eNCoDiNg-DeCoDiNg sYstem Extend HDMI 1.3b, 1080P digital signals over a single RG59 or RG6 coax cable. Advanced chip technolgy enables HDMI to be delivered over new or existing coax cable available in most homes over long distances with IR control back to the source and to switch between HDMI inputs on the transmitter. Include 2 button IR remote, 5Vdc power supply. specifications Video amplifier Speed 10.
PAGE 79
CALRAD 40 series - Composite & Component Video, VgA to hDmi Converters 40-720phD Composite ViDeo \ s-ViDeo to hDmi CoNVeRteR The 40-720PHD converts composite video/s-video/stereo audio to HDMI. Accepts NTSC 3.58, Pal-M and Pal-N composite video and S-Video inputs as well as 3.5mm stereo audio and converts the signals to 720P HDMI with audio. Audio is incorporated into the HDMI output as well as the 3.5mm stereo output simultaneously. Video inputs auto detect video source.
PAGE 80
CALRAD 40 series - hDmi Amplifiers 40-1061-2, 1X2 hDmi 1.3, 3D DistRiBUtioN AmpLiFieR One input to two outputs HDMI 1.3 distribution amplifier. HDCP and HDMI 1.4a compliant. Supports HDTV resolutions of 108i and 1080P. 5Vdc power supply included. Length 3.4” X Width 1.85” X Height 1.0”. Color: Black. supports 1080, 3D 40-1061-4, 1X4 hDmi 1.3, 3D DistRiBUtioN AmpLiFieR Front View One input to four outputs HDMI 1.3 distribution amplifier. HDCP and HDMI 1.4a compliant.
PAGE 81
CALRAD 40 series - hDmi switchers 40-991, 2 iNpUts to 1 oUtpUt mANUAL hDmi sWitCheR Two input to one output manual HDMI switcher with Locking push button switching. Passive operation does not require power. Supports 1080i and 1080P HDTV and 1600X1200 PC resolutions. Size: Length 5.25” X Width 4.5” X Height 1.25”. 40-992-1.3 CompACt hDmi 1.3B 3 X 1 sWitCheR 3x1 compact HDMI 1.3 switcher routes high definition video and digital audio from any one of the three sources to a single video display unit.
PAGE 82
CALRAD 40 series - hDmi switchers 40-968m-4 4X4 mAtRiX sWitCheR 40-968m-8 8x8 mAtRiX sWitCheR supports 1080p 3D FRoNt sUppoRts hDmi 1.4A, 1080p, 3D 4, 8 HDMI Inputs to 4, 8 HDMI Outputs HDMI matrix switcher. Supports HDTV resolutions of 480i, 576i, 480P, 576P, 1080i, 720P and 1080P 3D. Fully HDMI and HDCP compliant. The matrix switcher allows you to assign any of the HDMI inputs to any of the HDMI outputs through the manual push button controls or IR remote control.
PAGE 83
CALRAD 40 series - UsB pC Video Adapter 40-40AN2420 DVi-D, hDmi to UsB ADApteR 40-40AN2440 DVi-, hDmi to UsB ADApteR (sUppoRts ViDeo Up to 1680X1050 ) Front This USB Display Adapter enables you to connect one more monitor, LCD or projector to a computer with a USB 2.0 port. For desktop users adding an extra monitor via USB connection is easier than ever without having to open the computer chassis to install an internal video card. Once the installation is done, the USB-attached monitor soon wakes up.
PAGE 84
CALRAD 40 series - passive A\V hUm eliminators Typically 60Hz black or dark to light bars can be seen as slowly vertically moving horizonal bars in normal TV video signals, this normally caused by differnt ground path potentials. Calrads Hum Eliminator products remove 60hz hum bars from your video and audio signals to provide a interference free installation. 40-970 CompoNeNt ViDeo hUm eLimiNAtoR HDTV component video hum eliminator. Supports 480P, 720P, 1080i and 1080P resolutions. 75 ohm impedance.
PAGE 85
CALRAD 40 series - VgA Baluns, extenders 40-1010 VgA oVeR siNgLe CAt 5e eXteNDeR The 40-1010 allows you to transmit a VGA signal up to 580 ft. over Cat 5e. Supports PC resolutions up to 1280X1024. HDDB 15 Female input and output. The receiver has built-in active equalization circuitry providing adjustments of Gain\EQlevels for different lengths of cable. The transmitter and receiver requires individual power. 12Vdc power supplies, included. Sold in pairs, transmitter and receiver.
PAGE 86
CALRAD 40 series - VgA Coverters 40-888 VgA, hDtV CompoNeNt ViDeo to s-ViDeo, Composite ViDeo, 480i CompoNeNt ViDeo CoNVeRteR/sCALeR Rs232-iR Controlable The 40-888 allows you to convert VGA or 480i component video to composite video or S-Video. Supports NTSC 3.58, NTSC 4.43, Pal-M, Pal-N or Secam formats. Switchable component video or VGA inputs. Manual push button or IR remote controlled. RS232 for PC control. Easy to use OSD menu allows you to change output resolution, brightness and contrast.
PAGE 87
CALRAD 40 series - VgA Converters 40-885 osD setup menu Composite ViDeo to VgA CoNVeRteR \ sCALeR The 40-885 is a composite video and S-Video to VGA converter/scaler. Composite video and S-Video inputs are scaled up to PC or HDTV resolutions through the OSD menu. Supports NTSC 3.58, NTSC 4.43. Pal-M, Pal-N and Secam formats. Output resolutions for PC are 640X480, 800X600, 1024X768 and 1280X1024. HDTV resolutions are 480P, 720P and 1080i. 5Vdc power supply included. Size: Length 5.
PAGE 88
CALRAD 40 series - VgA Converters 40-889 Composite ViDeo to VgA CoNVeRteR (640 X 480) Composite to VGA, (RGB+HV) conversion using 1:1 computer based displays for CCTV applications. Compact size, plug and play installation. OSD Video adjustment for Brightness, Contrast, Color, Tint. Note ! Your VGA display must be able to render 640 x 480 resolutions in order for this converter to work. Includes 5Vdc, 500ma power supply. See example 1A for typical hookup. 75-547 BNC Male toRCA Female adapter, not Included.
PAGE 89
CALRAD 40, 28 series - hDmi Baluns & Wall plates 28-166k hDmi keYstoNe iNseRt 28-172 hDmi / CompoNeNt WALL pLAte Keystone HDMI 1.3b Female to Female Insert Fits in a standard keystone cutout, 1.3b Certified Female HDMI on front and back Keystone is rotated 90 degrees to insert into any standard keystone faceplate Gold-plated connections. Designer style wall plate not included. Overall depth 1", Color: White.
PAGE 90
CALRAD 40 series - VgA switchers 40-829-2, 2 iNpUt 1 oUtpUt mANUAL VgA sWitCheR 2 X 1 Manual VGA switcher. Max Input Video Level 1.5V p-p. Video Bandwidth 250 MHZ. Video Resolutions up to 1920 x 1440. Front panel selection buttons, Connectors: Input\Output HD-DB15 Female Jacks. LED selection indicators. DC Power 9Vdc 300ma Power supply included. Dimensions: Length 3.0" x Width 5.125" x Height 1.6". Front View Rear View 40-829-4, 4 iNpUt 1 oUtpUt mANUAL VgA sWitCheR 4 X 1 Manual VGA switcher.
PAGE 91
CALRAD 40 series - kVm/VgA switchers 40-825-8, 8X1 kVm sWitCheR Control eight computers with ONE PS/2 Keyboard / PS/2 Mouse / Monitor. Supports standard PS/2 mouse, Intellimouse, etc. Easy to operate and install - No software required. Keyboard and mouse emulation for error free PC booting PC selection via push button switches or hot key. Auto scan function to monitor PC operation, scan interval 5-30 seconds. Superior video quality: up to 1920 x 1440. Controls PC's with one keyboard, mouse and monitor.
PAGE 92
CALRAD 40 series - VgA Wallplates/Adapters 28-160 siNgLe high DeNsitY DB-15 FeeD-thRU AND DUAL RCA FeeD-thRU JACks White plastic designer insert plate. HDDB-15 high density Female to Female jack with red/white RCA Female to Female jacks. Includes mounting hardware. hDtV 28-160.........................Nickel 28-160g........................Gold 35-700 DVi-i male to VgA DB-15 Female Adapter Allows you to connect VGA display to a DVI-I graphics card.
PAGE 93
CALRAD 40 series - Audio/Video Balun extenders 40-6920 CAt5e CompoNeNt / Composite ViDeo / DigitAL / steReo AUDio ReCeiVeR BALUN The 40-6920 is a CAT 5 based component video, composite video, PCM digital audio and stereo audio distribution amplifier receiver. Designed to work together with the transmitter unit 40-6950. The receiver unit can be up to 1000 ft away from the transmitter unit. The receiver has RCA loop outputs for cascading to another distribution amplifier.
PAGE 94
CALRAD Video pattern generators 40-884 VgA / CompoNeNt ViDeo hDtV pAtteRN geNeRAtoR The 40-884 is an easy-to-use handheld video pattern generator that generates a wide variety of test patterns for comprehensive testing, calibration, and repair of HDTV or PC monitors, and other display based video equipment. Delivers the quality and functionality you would expect from an expensive high end HDTV pattern generator with an easy to understand three button control interfaces and visible OSD, 27 patterns total.
PAGE 95
CALRAD 40 series - switches spst RoCkeR sWitChes With L.e.D. L.e.D indicator (Switch contacts rated 5 AMP-125 VAC) Easy Snap-in mounting. Hole 3 1 size / 4 " x / 2 ". Dropping resistor required. DC voltage: 6 vdc-270 ohms, 12 vdc-680 ohms, 24 vdc-1.5k. 40-710 ............................ Red LED 40-711 ........................ Green LED 40-712 ...................... Orange LED 40-600, spst 40-601, DpDt toggLe sWitCh SPST bakelite case, bat handle with chrome on/off plate. Solder-type terminals.
PAGE 96
CALRAD 40 series - switches miNiAtURe CiRCUit BoARD moUNtiNg sWitChes Right angle mounting - 5/16" long threaded bushing. Contact rating 6 Amp, 125 Vac. All mount in 1/4" hole. 40-502 ............................. DPDT On-On 40-503 ....................... DPDT On-Off-On Body Size: 1/2" x 1/2" x 3/4" deep including terminals miNiAtURe CiRCUit BoARD moUNtiNg sWitChes Printed circuit mounting - 5/16" long threaded bushing. Contact rating 6 Amp, 125 Vac. All mount in 1/4" hole. 40-521 .......................
PAGE 97
CALRAD 40 series - switches 40-632 spDt-oN/oN RoCkeR sWitCh Molded plastic, encased with mounting3 flanges. Mounting centers: 1 /8” Size: 111/16" x 5/8" x 1 1/16". Rating:3 amps, 125 volts AC. 40-616 DpDt miNiAtURe pUshBUttoN sWitCh Same as 40-615. 7 /16" x 7/16" x 7/8" L - including terminal. Body color is green, button color is black. RoCkeR sWitChes 6 Amp, 125 Vac, mounts in 3/4" round hole. Color is black. 40-687 ................... DPDT-ON/ON 40-690 ....................
PAGE 98
CALRAD 40 series - security switches 40-625 iNLiNe pUsh BUttoN sWitCh Red N/O momentary push button switch mounted in a silver XLR housing. Operating voltage 125Vac, 3Amp max. current. Accepts up to .30” cable. 40-698 spst momeNtARY pUsh to mAke sWitCh 1 Amp, 125 Vac. Mounting hole: 1 /2". Overall length: 3/4". DpDt miNiAtURe Dip stYLe ReLAYs 40-760 5Vdc - 3.6 Vdc Min, DC Resistance 167 ohms 40-761 12Vdc - 8.5 Vdc Min, DC resistance 388 ohms 40-762 24Vdc - 16.
PAGE 99
CALRAD 40 series - security switches mAgNetiC CoNtACt sWitChes 40-755 3/8" ReCesseD CoNtACt sURFACe moUNt CoNtACts 40-655 WAteR seNsiNg CoNtACt sWitCh 40-752 WiDe gAp sURFACe moUNt CoNtACt 40-753-gY sURFACe moUNt CoNtACt Versatile, used in many alarms sensing for window and door protection. Specify either normally open or normally closed. Mounting center: 21/8" 130V max. 50 mA or 10 watts. Up to .5 Amp max. 40-656........... Normally Closed 40-657 .............
PAGE 100
CALRAD 40 series - security switches pLAstiC BALL pLUNgeR sWitCh Completely environmental proof for window, door protection, etc. Mounts in 3/4" hole. Mounting centers 1 3/16". Rating 100mA-100 Vdc max., 1 Amp-10 Vdc max., 10 watts max. 30” wired leads. Overall mounting depth 1.7”. 40-670 ............ Normally Closed 40-671 ....... Normally Open and Normally Closed contacts (Both with ball depressed.
PAGE 101
CALRAD 42 Series - iPOD Accessories 42-100-1.5M, -2M 42-107-RT-RT 42-105 42-107-ST-ST-3 42-107-ST-RT-2,-3 42-115 3.5mm iPOD, iPAD 3.5mm iPOD, iPAD CONVEINENT iPOD, iPOD A\V 3.5mm iPOD, iPAD iPOD STEREO STEREO STEREO iPAD USB-BASED STEREO INTERFACE CABLE INTERFACE CABLE Connect your iPod to INTERFACE CABLE INTERFACE CABLE INTERFACE CABLE DATA AND POWER Plug your iPOD into a TV display. Watch Right angle 3.5mm your home stereo Straight 3.
PAGE 102
CALRAD 45 Series - AC Adapters & Power Supplies Technical drawings and specifications are available for these power supplies. Please ask your Calrad sales representative for details. All DC adapters with coax power plugs are wired positive center unless specified otherwise. All DC adapters with 3.5mm power plugs are wired tip positive unless specified otherwise. AC TO DC ADAPTERS 45-754 multi plugs, 6 ft. cord, UL & CSA app .................Style C............Input 117 Vac, Output 3,4.5,6,7.
PAGE 103
CALRAD 45 Series - AC Adapters & Power Supplies 45-752A 12Vdc REGULATED WALL MOUNT POWER SUPPLY 45-769 11.5 VOLT DC, 1.95 AMP DESK TOP POWER SUPPLY For use with personal computers, TV games, printers, communications, etc. Input 117Vac (60 Hz). UL and CSA approved. AC cord is 5ft. and DC 6ft. cord Specifications Dimensions:.....23/4” W x 35/8” H x 25/16” D Power Plug .................2.1 mm coax Color...................................... Black Plugs directly into standard 117Vac wall outlet.
PAGE 104
CALRAD 45 Series - AC-DC Adapters, Power Supplies 45-840 DC POWER SUPPLY FOR CCTV AND ACCESSORIES Total maximum supply current at 12Vdc and each channel output is fused at 1.1 Amps. This DC power supply centralizes the power sources for multiple DC powered CCTV cameras and/or accessories. The power input, power transformer, D regulator and all independently-fused power outputs are enclosed in one heavy duty easy to install metal enclosure.
PAGE 105
CALRAD 45 Series Battery Chargers, Transformers 45-758 3 AMP REGULATED BATTERY CHARGER & POWER SUPPLY For alarm system power and automatic recharging of back-up batteries. LED power indicator, 2.5 Amps continous and 3 Amps peak power. Input 16Vac to programmable output 6/12/24Vdc. Fuse protected. Comes with battery leads. 6 Position Barrier Strip. Mounts with double stick tape. 45-759 1.2 AMP REGULATED CHARGER BOARD ONLY 16Vac in, 12Vdc out. Fuse protected.
PAGE 106
CALRAD 45 Series - Transformers, DC Power Adapters Technical drawings and specifications are available for these power supplies. Please ask your Calrad sales representative for details. MINI TRANSISTOR AUDIO TRANSFORMERS FOR PRINTED CIRCUIT BOARD MOUNTING Ideally suited and selected for building or replacement of transistorized equipment. High vacuum impregnation and application of a special coating seals the coils.
PAGE 107
CALRAD 45 Series - Variacs & AC Power Cords 45-740 VARIABLE OUTPUT VOLTAGE REGULATOR Adjustable output from AC line, 0 to 130 Volts. Input 117 Volts, 5 Amps. Current rating apply over full range of output voltage. Specifications: Dimensions....61/2" diameter (Including Terminals) 51/2" deep (Knob to Base) Weight...................................................... 9.2 lbs. 45-741 VARIABLE OUTPUT VOLTAGE REGULATOR 5 amp isolated supply w/ volt meter.
PAGE 108
CALRAD 45 Series - Power Inverters DC to AC POWER INVERTERS Car cigarette plug power inverters. Now you can operate most AC appliances such as camcorders, computers, fax machines and portable TVs from the DC current of your car’s battery. This unit is fully portable and gives you a standard AC outlet wherever your car is. These units plug into a cigarette plug and changes your car’s DC into AC by using a Modified Sine Wave. Grounded AC outlets. Units come with low battery alarm and auto shutdown.
PAGE 109
CALRAD 45 Series - Transformers, Power Supplies STEP-UP/ DOWN TRANSFORMERS PORTABLE STEP-DOWN TRANSFORMERS Can be reversed for use as step-up transformers. No isolation from primary to secondary. 45-780 ............. 220 Vac - 110 Vac, 50 Watts 45-792............ 117 Vac or 100Vac, 500 Watts 45-781 ........... 220 Vac - 110 Vac, 100 Watts Cord in on 117 Vac side 45-782 ........... 220 Vac - 110 Vac, 200 Watts 45-793 ............. 117 Vac or 100 Vac, 950 Watts 45-783 ...........
PAGE 110
CALRAD 55 Series - Easy Install HDTV Cables Technical drawings and specifications are available for these cables. Please ask your Calrad sales representative for details. 350 MHz EZ-HDTV / VGA CABLES Installing a 15 pin HDTV cable in a wall or conduit just became much easier. No more on-site cable prep or connector soldering. Just snake and plug, it’s that EZ.
PAGE 111
CALRAD 55 Series - Component Video Cables 55-873 SHIELDED RGB VIDEO CABLES Used to connect HDTV satellite receivers to HDTV with RGB inputs. Both styles utilize HD15 Male connectors with either RCA or BNC RGB Male ends. Overall cable O.D. .37”. Mini 75 ohm coax cable O.D. .1”. Male HD15 to 3 RCA Males 55-612-SP................................................1 ft. HDTV 55-873-RCA-3....................................3 ft. 55-873-RCA-6....................................6 ft. 55-873-RCA-12 ..................
PAGE 112
CALRAD 55 Series - SVGA Cables 55-612 Male to Male SVGA CABLES HDTV 55-614 Male to Female Shielded high quality SVGA HD-DB15 interface cables with ferrite RFI/EMI filters at each end. Perfect for computer displays. Connectors come with long plastic thumb screws and protective dust caps. Overall cable O.D. .37”. Specify length when ordering. Lengths Available Male to Male Male to Female 55-612-6”................6 n 55-612-3..................3 ft 55-612-6..................6 ft 55-612-10..............
PAGE 113
CALRAD 55 Series - SVGA, DVI Cables 55-613M MOLDED SVGA AND 3.5mm STEREO AUDIO CABLE HDTV High Quality SVGA cable with audio combined. Comes with gold plated HD15 and 3.5mm stereo male to male ends to provide combined audio and video in one cable. Lengths Available 55-613M-3 ........................3 ft. 55-613M-6 ........................6 ft. Perfect for Laptop or DFP Use 55-613M-10.....................10 ft 55-613M-15 ....................15 ft. 55-613M-25 ....................25 ft. SVGA and 3.
PAGE 114
CALRAD 55 Series - HDMI High Speed Cables 55-644A HDM High Speed Male to Female cable with Rotating Connectors 55-643A HDMI High Speed Male to Male cable with Rotating Connectors 24K gold plated Male to Male HDMI cable with 90 degree vertical rotating connectors. 28 awg 10.2 Gbps. Lengths Available 55-643A-HS-1.................................1 ft. 55-643A-HS-3.................................3 ft. 55-643A-HS-6.................................6 ft. 55-643A-HS-10.............................10 ft.
PAGE 115
CALRAD 55 Series - HDMI High Speed Cables HDMI Male to Male High Speed 1080P with snake skin Lengths Available 55-636-HS-1.3-3.....................................3 ft. 55-636-HS-1.3-6 .....................................6 ft. 55-636-HS-1.3-10 .................................10 ft. HDMI Male to Male High Speed 1080P Lengths Available HDMI 1.4 Male to Male Lengths Available HDTV HDMI 1.3b HDTV HDMI 1.
PAGE 116
CALRAD 55 Series - Component Video Cables 55-615 HIGH QUALITY COMPONENT VIDEO CABLE 55-872 SHEILDED COMPONENT VIDEO CABLE Silver plated, flat, triple shielded 75 Ohm RGB component video cable with Teflon dielectric. Gold Plated RCA turbine series connectors with compression strain relief. 55-615-3.......................................3 ft. 55-615-6.......................................6 ft. 55-615-10...................................10 ft. 55-615-12...................................12 ft. 55-615-15...
PAGE 117
CALRAD 55 Series - Component, Audio-Video Cables 5 RCA MOLDED MALES TO 5 RCA MOLDED MALES, SHIELDED, GOLD PLATED CONNECTORS 55-611-RCA-3 ................................3 ft. 55-611-RCA-6 ................................6 ft. 55-611-RCA-10 ............................10 ft. 55-611-RCA-12 ............................12 ft. 55-611-RCA-15 ............................15 ft. 55-611-RCA-20 ............................20 ft. 55-611-RCA-25 ............................25 ft. 55-611-RCA-35 ...........................
PAGE 118
CALRAD 55 Series - Component, S-Video Cables 55-617 LOW LOSS MULTI-CONDUCTOR (COMPONENT VIDEO, COMPOSITE VIDEO,STEREO ANALOG AUDIO, RF) SHIELDED COAX AUDIO\VIDEO CABLE. SUPPORTS STANDARD DEFINITION AND HDTV. 7 Individually molded, color coded cables. 1 x RCA composite video Male plug (Yellow). 3 x RCA component video Male plugs (Y=Green, Pb=Blue, Pr= Red). 2 x RCA stereo analog audio Male plugs (1 ea. Red & White), 1 x RCA Digital audio Male plug (Orange). 1 x “F” RF Male plug (Black). Overall cable O.D. .
PAGE 119
CALRAD 55 Series - S-VIDEO, Video Cables 55-773G SVHS 4-Pin Plug to 4-Pin Jack– Gold Connectors Flexible S-VHS cable. Low loss pro style cable for running long lengths. Gold plated connectors 75 0hm dual flat coax cable. 27 awg wire, spiral copper shielded with black PVC jacket. Capacitance is 55pf/m (16.8pf/ft). Attenuation is approx. .06db/m at 100mhz. Shielded. 55-773G-6 ............... 6 ft., flat cable 55-773G-10 ........... 10 ft., flat cable 55-773G-25 ........... 25 ft.
PAGE 120
CALRAD 55 Series - Toslink Cables, Digital Converter 55-502 5mm FIBER OPTIC CABLE Toslink-Toslink Fiber-Optic Cable for Digital Audio with High Quality Toslink Connectors Lengths are in Meters 55-502-1........................1 meter 55-502-2........................2 meters 55-502-3........................3 meters 55-502-4........................4 meters 55-502-5........................5 meters 55-502-50 ....................50 feet. 50 ft cable must be used with the Calrad 10-117 toslink amplifier.
PAGE 121
CALRAD 55 Series - Home Theater Audio\Video Cables Technical drawings and specifications are available for these cables. Please ask your Calrad sales representative for details. HIGH RESOLUTION INTERCONNECT CABLES Designed with the latest technology available today. 99.99% pure oxygen free copper “OFC” cable. Polystyrene foam insulation, double braided shield to protect against radio frequency interference. Heavy duty zinc alloy plated RCA connectors, 24 karat gold plating.
PAGE 122
CALRAD 55 Series - Audio Cables GOLD PLATED AUDIO CABLE SERIES 18 Kt. Gold Plated RCA-type phono connectors insure against faulty connections. Ultra Low Loss shielded cable provides the best in audio reproduction. Gold plated Steel Springs provide strain relief and prevent damage to the cable from repeated flexing. DUAL RCA MALE PLUGS Dual RCA plugs at each end. Separate ground. Gold Plated. With ground wire. 55-800G ............................ 3 ft. 55-802G ............................ 6 ft. 55-803G .....
PAGE 123
CALRAD 55 Series - Audio Cables 55-705 High Resolution 6mm Dual Audio Cable,Triple Shielded with High Quality Gold RCA Male to Male Metal Plugs This cable is perfect for any stereo audio feed for home theater systems. 2 braided shields and 100% foil coverage. Cable O.D. .47” x .23”. 55-705-1...........................................1ft. 55-705-3..........................................3 ft. 55-705-6..........................................6 ft. 55-705-10......................................10 ft.
PAGE 124
CALRAD 55 Series - Audio\Video Cables GOLD-PLATED DUAL RCA-RCA, SHIELDED STEREO AUDIO CABLES Gold-Plated, dual RCA Male molded plugs at each end. 55-1010G .......................... 3 ft. 55-1011G .......................... 6 ft. 55-1013G ........................ 15 ft. 55-1015G ....................... 25 ft. SHIELDED STEREO AUDIO CABLES Dual right angle RCA Male molded plugs at each end. 55-1005 ............................. 3 ft. 55-1007 ............................. 6 ft. 55-1008 ........................
PAGE 125
CALRAD 55 Series - Video/CCTV Cables Technical drawings and specifications are available for these cables. Please ask your Calrad sales representative for details. HIGH QUALITY VIDEO/CCTV RG174 CABLE Designed for high flexibility and sharp cornered applications, this 75 ohm cable is perfect for areas where a low profile cable is needed. This is modeled after the Belden 8218 cable with comparable specifications. Available in three different configurations. Molded 75 ohm connectors with 95% shielded coax.
PAGE 126
CALRAD 55 Series - Video/CCTV Cables 55-876 COAX JUMPER CABLE (75 OHM) RG59U coax cable with Male F-connector to Male BNC connector. Shielded.6 ft. long 55-874 COAX JUMPER CABLE (75 OHM) RG59U coax cable with Male RCA connector to Male Fconnector. Shielded. 6 ft. long BNC COAX CABLES (75 OHM) RG59U coax cable with Male-type BNC connectors each end. 55-879-2 ........................... 2 ft. 55-879-3 ........................... 3 ft. 55-879-6 ........................... 6 ft. 55-879-12 ....................
PAGE 127
CALRAD 55 Series - RF Cables COAX JUMPER CABLES RG59U or RG6 coax cable with molded Male “F” connectors each end. RG6 Shielding specifications for RG6 cables: Conductor: 1.1mm copper Insulation: 5.0mm foam PE Brading 60%: 32 x 0.12mm CU Foil 100%: 0.025mm O.D. PVC: 6.8mm UL Approved. 55-790 .................... 3 ft., Black 55-790-W ............... 3 ft., White 55-791 .................... 6 ft., Black 55-791-W ............... 6 ft., White 55-792 .................. 12 ft., Black 55-792-W .............
PAGE 128
CALRAD 55 Series - Speaker & Hook-Up Wire 55-846 FLAT SPEAKER WIRE 2 conductor speaker wire for under carpets and anywhere thickness is a problem. All lengths come in non-terminated spools. STRANDED HOOKUP WIRE Red and black multi-purpose 2 conductor hookup wire. 16 Gauge 55-848-50 .............50 ft. (1.28 lbs) 55-848-100 .........100 ft. (2.64 lbs) 18 Gauge 55-847-50..............50 ft. (0.94 oz) 55-847-100 .........100 ft. (1.84 lbs) 16 Gauge 55-846-2.5-25.........16 Gauge, 25 ft. 55-846-2.5-50........
PAGE 129
CALRAD 55 Series - Audio Patch Cables MIG Professional Series Instrument Cables MIG (mic, instrument, guitar) cable comes with 1/4” to 1/4” Male mono plugs mated to our low capacitance cable, designed with 95% “OFC” braided cable, with a 22 gauge center conductor, special high density filler surrounds each conductor to help strengthen the cables tensile strength. Terminated with Calrad’s toughest connectors.
PAGE 130
CALRAD 55 Series - Audio Cables 55-971 2 CONDUCTOR RIGHT ANGLE 1/4” CABLE Right angle1/4” Mono plug to stripped and tinned leads. 6 ft. long. Shielded. 55-912 HEADPHONE CABLE 1 /4" Stereo plug to 3.5mm Stereo jack. Coil cord 6 ft. extended. 3 CONDUCTOR SHIELDED 1/4” STRAIGHT PLUG CABLE 1 /4” Stereo plug to stripped and tinned leads. Shielded. 55-952 ............................... 6 ft. 55-951 ............................. 12 ft. 55-913 STEREO HEADPHONE EXTENSION CABLE 3.
PAGE 131
CALRAD 55 Series - Audio Cables 3 CONDUCTOR 1/4" SHIELDED EXTENSION CABLE 1 /4” Molded stereo plug to Stereo jack. 1 /4“ 55-858 ............................. 12 ft. 55-859 ............................. 25 ft. 55-986 STEREO HEADPHONE EXTENSION CABLE 1 1 /4” stereo plug to /4” stereo jack. 20 ft. 55-950 3.5 mm mono plug, 6 ft. long to standard inline 1/4" Mono jack (shielded). 3 CONDUCTOR SHIELDED 1/4” PLUG 1/4” Stereo plug each end. 55-852B-3 .................................. 3 ft. 55-853 ............
PAGE 132
CALRAD 55 Series - Audio Cables AUDIO JUMPER CABLES 3.5mm mono plug on each end. Shielded cable. 55-939 .................................1 ft. 55-940 .................................3 ft. 55-941 .................................6 ft. 55-942 ...............................10 ft. 55-943 ...............................25 ft. 55-943-50 ..........................50 ft. 10 db RECORDING PATCH CORD, 6 ft.
PAGE 133
CALRAD 55 Series - Audio\Video Cables 55-869 4 CONDUCTOR SHIELDED RIGHT ANGLE 3.5mm A/V CABLE Right angle Male to Male audio and video interface cable for portable A/V devices using 4 conductor 3.5mm input/output jacks. Carries composite video and L+R audio signals. 55-869B-3............................3 ft. 55-869B-6............................6 ft. 55-869B-12........................12 ft.
PAGE 134
CALRAD 55 Series - Audio \ MIDI \ AC Cables 55-975 Right angle 1/4" mono plug to pair of alligator clips. 6 ft. long (unshielded). STEREO MIDI CABLES Shielded stereo midi patch cables with 5-pin DIN plug on each end, 180° pattern. 55-906 .................................6 ft. 55-906A .............................15 ft. 55-996 “Y” ADAPTER CABLE 1 /4" Stereo jack to dual 3.5 mm mono plugs. Parallel wired. Shielded. 12” long. 55-972 Right angle RCA plug to knurled microphone connector (not standard).
PAGE 135
CALRAD 55 Series - AC Cables, Bulk Video Cable 55-782 AC \ IEC COMPUTER POWER CABLE (STRAIGHT) 55-782-1 ..............................1 ft. 55-782-1.5 .........................18 in 55-782-2 ..............................2 ft. 55-782-3 ..............................3 ft. 55-782-6 ..............................6 ft. 55-782-12 ..........................12 ft. AC \ IEC COMPUTER POWER CABLE (RIGHT ANGLE) 55-782RT-1.5 .................18 in 55-782RT-3 ......................3 ft. 55-782RT-6 ......................
PAGE 136
CALRAD 55 Series - Bulk Audio & Video Cable COMPONENT, SHIELDED VIDEO CABLE 55-610B, 3 COAX CABLES 55-611B, 5 COAX CABLES Oxygen free copper “OFC”. Miniature shielded 75 ohm video coax cable, red, green, blue, black, white. Multi-stranded tension barring filler for superb strength. Flexible .05” thick black rubber jacket. Overall cable diameter .65”, individual coax cable diameter .20”, Individual cable dielectric insolation O.D. .118”. Nominal capacitance 17pf/ft. Shielding 93% braided copper.
PAGE 137
CALRAD 55 Series - USB, Firewire Cables, USB Extenders 72-125 VERSION 2.0 USB TYPE A CABLES 72-126 USB 2.0 TYPE A/B CABLES Universal Serial Bus 2.0 (USB 2.0). USB 2.0 increases signal transmission from standard USB 1.1 topping out at 12Mb/s up to 480Mb/s for USB 2.0. These cables are completely backward compatible with standard USB ports, so there isn’t any need to worry that you will not be able to use USB 2.0 cables on the standard USB products you already own. Lengths Available 72-125-6................
PAGE 138
CALRAD 60 series - Analog Panel Meters 60-118 THROUGH 60-133 23/8” FULL VIEW PANEL METERS Designed for modernistic equipment. Beautiful appearance, easy to read D'Arsonval type movement, accuracy within 2%. Will mount in panels up to3/8” thick, has zero adjustment screw. Size: 23/8" x 13/4" x 1 /4" deep, including terminals and will mount into 11/2" hole. Illumination Kit available for all of this series (60-149). Available in bulk or packaged. Comes with meter cut out template and mounting hardware.
PAGE 139
CALRAD 65 Series - VOM Multimeters 65-263 DIGITAL MULTIMETER 3.5 digit DMM has 1/2” high LCD display. 20 position rotary switch sits in compact, shirt pocket size meter. Has diode, transistor and continuity tester. Has 10 amp DC current range and includes temperature probe good from -40 to 1000 C High impact yellow plastic case. Comes with fuse protection and 9 volt battery. Specifications: DC Volt......0-200mv -2V-20V-200V-1000V Test Leads.......(Red & Black) 24 “ AC Volt................................
PAGE 140
CALRAD 65 Series - Test Leads 90-767 TEST CLIP SET Thin wire kit of 10 leads, 15" long. Miniature insulated alligator clip each end. 2 each of 5 colors: White, Black, Red, Green, Yellow. 90-764 TEST CLIP SET Same as 90-767, but with medium weight clips and wire. Colors: White, Black, Red, Green, Yellow. 90-770 HEAVY DUTY TEST CLIP SET Heavy duty, flexible wire, insulated clips. Four 30" cables. Colors: Black, Red, Green, Yellow.
PAGE 141
CALRAD 70 Series - Telephone Accessories FLUSH MOUNT, SINGLE-JACK MODULAR WALL PLATES 70-535 SOLID OAK WALL PLATE For new construction or conversion to modular instruments. Screw terminals. 70-403-AL ................4-Wire Almond 70-403-ALS 4-Wire Almond Smooth 70-403-BR.................4-Wire, Brown 70-403-S .......4-Wire, Ivory, Smooth 70-403-WS...4-Wire, White, Smooth 70-426-S .......6-Wire, Ivory, Smooth 70-426-W ...................6-Wire, White 70-426-WS...6-Wire, White, Smooth 70-530-S .......
PAGE 142
CALRAD 28 Series - Cable Distribution Wall Plates 28-CEDH1-BK Black Single Gang Cable Distribution Wall Plate 28-CEDH1 Single Gang Cable Distribution Wall Plate 28-CER-1 Single Gang Scoop Style Cable Distribution Wall Plate 28-CER-2 Double Gang Scoop Style Cable Distribution Wall Plate Plastic single gang hood provides a versatile method of passing multiple cables from behind the wall to equipment.
PAGE 143
CALRAD 70 Series - Telephone Accessories ROUND MODULAR WALL JACK For new construction or conversion to modular instruments. 4-wire screw terminals. 70-411.........................Ivory 70-411-W...................White 70-558 SINGLE GANG 70-559 DUAL GANG EZ MOUNT PLATE Comes with two mounting screws. 70-559 SURFACE JACK ASSEMBLY, STD 4-WIRE Replacement jack with modular jack and color-coded lugs. Complete with connector block. 70-402 ...................4-Wire, Ivory 70-402-W .............
PAGE 144
CALRAD 70 Series - Telephone Accessories MODULAR "T" ADAPTER Converts single modular jack into two modular jacks. 70-405.............4-Wire to 4 & 4 Std, Ivory 70-405-W......4-Wire to 4 & 4 Std, White 70-424.Female 8-Wire to 4 & 4 Male, Ivory 70-425.......... 6-Wire to 6 & 6 Male, Ivory 70-423..............................8 wire, Ivory 70-489 TWO LINE SPLITTER Contains one six-position, four conductor modular plug, and two six-position, two conductor modular jacks.
PAGE 145
CALRAD 70 Series - Telephone Accessories 70-650 DSL SINGLE LINE MICRO FILTER 70-392 "JELLYBEAN"-STYLE TELEPHONE & ALARM INTERCONNECTS Provides uninterrupted DSL service and crystal clear conversations. Sharing a DSL connection with analog telephones may cause interference. 2 Wire DSL filters eliminate all interference between DSL line and analog telephone lines. The result is clear, clean lines for your telephones, fax machines, answering machines, caller ID and analog modems.
PAGE 146
CALRAD 70 Series - Telephone Accessories MODULAR PLUGS Modular plugs to use on end of flat or round modular cable. 70-495 ....................................... Handset Type (10 pkg.) 70-496 ........................................RJ11 Line Cord Type (10 pkg.) 70-496R .................................... RJ11 4-pin for round cable 70-496R-UL .............................. RJ11 4-pin, round stranded, UL app. 70-497 ....................................... RJ45 8-pin Type (5 pkg.) 70-497R ...................
PAGE 147
CALRAD 70 Series - Telephone Accessories/Keystone Inserts STRAIGHT MODULAR LINE CORDS Modular plugs on both ends. Flat cable. MODULAR HANDSET CORDS Coil style handset cable with modular plugs at each end. 6' LONG 70-445 ..................................Ivory 70-446 .................................White 70-447 .................................Black 70-448 ....................................Ash 70-449 ................................Brown 12' LONG 70-450 .................................White 70-451 .
PAGE 148
CALRAD 72 - Series Network Products DATA TELEPHONE TELEPHONE 72-305-E 8 POSITION FEMALE TO FEMALE KEYSTONE FEED-THRU JACK 72-306 6 POSITION FEMALE TO FEMALE KEYSTONE FEEDTHRU JACK 6-POSITION UL KEYSTONE MODULAR JACK CAT5e RJ45 Female to Female feed-thru keystone insert. Color: Black. RJ12, 6 pin Female to Female feed-thru keystone insert. Color is Black keystone audio/video and data keystone accessories DATA CAT 5e IDC type meets level 3 & 4 requirements.
PAGE 149
CALRAD 72 Series - Keystone Inserts SVHS VIDEO FEMALE TO FEMALE RECESSED FEED-THRU KEYSTONE INSERT Recessed Female to Female mini din jack, in 4, 6 or 8 pin configurations. Colored insert snaps into keystone flush-faced and provides for easy identification. Comes in either Gold or Nickel plated connector. Available in black, blue, green, ivory, orange, purple, red, white, or yellow. Please specifiy color and style when ordering. 4 Pin Version Nickel Version 72-304-BK. .......................
PAGE 150
CALRAD 72 Series - Keystone Inserts, Network Products 72-125KS-2 Bi-directional passive UTP Cat5e, Cat6 USB adapters are perfect for low power low-speed USB devices like touch screens, printers, RF dongles, media storage devices. Easy to install cable using a cable stripper, slotted screw driver. Mounts in a standard keystone wall plate or can be used as a stand alone solution. Supports 1.1 and 2.0 devices, some 2.0 devices will work up to the 65 ft. and others will not and will be limited to 1.
PAGE 151
CALRAD 72 Series - Network Products CAT 5e FIELD INSTALLABLE 2PIECE SNAP-ON RJ45 SNAGLESS BOOTS 72-105-BK ....................... Black 72-105-BU ..........................Blue 72-105-IV .......................... Ivory 72-105-OR .....................Orange 72-105-RD...........................Red 72-105-WH ...................... White 72-105-YL .......................Yellow 72-230 KEYSTONE PLASTIC WALL PLATES Includes mounting hardware.
PAGE 152
CALRAD 72 Series - Network Products 72-241 7.3” MODULAR CRIMP TOOL 72-242 7.6” PRO MODULAR CRIMP TOOL Cuts, strips,and crimps two types of plugs 6P & 8P in one. For crimping: 8P8C/RJ45, 6P6C/RJ12, 6P4C/ RJ11 and 6P2C plugs. Steel body with easy grip plastic handles. For crimping 6P-RJ11 / RJ12 & 8P-RJ45, suitable for both stranded and solid wire. Provides precision crimping, cutting and stripping wire in one operation. Ratchet style mechanism.
PAGE 153
CALRAD 72 series - Cat 6 Cables & Adapters 72-111 1 GHz CAT-6E, RJ45 SNAGLESS CABLES 72-111 1 GHz CAT-6E, RJ45 SNAGLESS CABLES 72-111 1 GHz CAT-6E, RJ45 SNAGLESS CABLES BLACK GREY BLUE 72-111 1 GHz CAT-6E, RJ45 SNAGLESS CABLES 72-111 1 GHz CAT-6E, RJ45 SNAGLESS CABLES YELLOW RED 72-111-3-BK ..............3 ft. Black 72-111-5-BK ..............5 ft. Black 72-111-7-BK ..............7 ft. Black 72-111-10-BK ........ 10 ft. Black 72-111-14-BK ........ 14 ft. Black 72-111-15-BK...........15 ft.
PAGE 154
CALRAD 72 Series - Mini USB Cables & Adapters INLINE USB ADAPTERS Adapts USB configurations Type A and B and PS2 (6 pin mini din) 72-256 TYPE “A” FEMALE USB TO TYPE “B” FEMALE USB ADAPTER 72-252 MALE TO MALE TYPE “A” USB ADAPTER 72-253 FEMALE TO FEMALE TYPE “A” USB ADAPTER 72-254 MALE TO MALE TYPE “B” USB ADAPTER 72-193 72-258 TYPE “A” MALE USB TO PS2 FEMALE USB ADAPTER 72-259 TYPE”A” FEMALE USB TO RJ45 PLUG TYPE “A” MALE USB TO PS2 MOUSE AND KEYBOARD ADAPTER 72-255 TYPE “A” MALE USB TO TYPE “B” F
PAGE 155
CALRAD 72 Series - USB Hubs, USB-PS2 Over Cat 5 Extenders 72-128......16 ft. 72-128-26.....26 ft. USB TYPE ‘A’ 16 ft. EXTENSION CABLE 72-131 USB 1.1 CAT5e Extender 72-142 4 Port USB Type ‘A’ 2.0 Hub with 6” Pigtail 40-KM01 PS2 Mouse and Keyboard over Cat5e/Cat6 Balun Running out of USB Ports? Look no further. The Calrad 72-142 is a portable solution to your USB port problems.
PAGE 156
CALRAD 72 Series - USB, Firewire, DB9/Mouse Cables, Bulk Cat5e, 6 Wire USB SERIAL CABLES Universal Serial Bus 2.0 (USB 2.0) brings a new standard of speed to the USB market. These new highspeed USB cables give more versatility to computers and peripherals than ever before. USB 2.0 increases signal transmission from standard USB 1.1 topping out at 12Mb/s up to 480Mb/s for USB 2.0.
PAGE 157
CALRAD 75 Series - tV & rf-CatV accessories Technical drawings and specifications are available for these products. Please ask your Calrad sales representative for details. tHrU tHE WaLL BUSHINGS fOr COaX CaBLE Gives your installation a professional look. Flanges help to secure an protect cable, 2 pieces per package. 75-498 Ivory for RG59, RG6 cable, max O.D. .31” opening 75-498-BK Black for RG59, RG6 cable, max O.D. .31” opening 75-498-Q Clear for Quad RG6 cable, max O.D. .
PAGE 158
CALRAD 75 Series - tV & rf-CatV accessories Technical drawings and specifications are available for these products. Please ask your Calrad sales representative for details. 75-507 8-WaY COaXIaL SPLIttEr UHF/VHF indoor-outdoor splitter. 75 W. 1 input to 8 outputs. Frequency response of 5 to 900 MHz. Zinc die cast construction with mounting tabs and screws and cast in grounding black. Precision machined threads. Anti-corrosion plating and epoxy sealed.
PAGE 159
CALRAD 75 Series - tV & rf-CatV accessories Not for Digital Cable Use Analog Cable 54-890 MHz 75-726 75 Ohm DC BLOCKEr 5-1750MHz, insertion loss 0.3dB, return loss 16dB typical. Nickel plated machined brass. Passes RF and blocks DC from the signal path. Male ‘F’ connector to F81 style female. Overall length 1.6”. 75-725 16-20dB SLOPED 9502250MHz aMPLIfIEr High quality satellite RF inline amplifier suitable for DBS or MMDS satellite applications. Sloped gain for long cable runs.
PAGE 160
CALRAD 75 Series - tV & rf-CatV accessories 75-496 a+B tV aNtENNa VCr & CaBLE SWItCH 40-695a a/B COaXIaL PUSHBUttON rf SWItCH 40-696 a/B/C COaXIaL PUSHBUttON rf SWItCHEr 75 ohm inputs/output for hookup of outdoor TV antenna or MATV outlet cable TV or VCR to TV set. 40dB isolation. High isolation RF A/B pushbutton switch. Complies with FCC part 15.6. 75 ohm RF “F” Female connectors. Lets you select from two inputs. Reversible. 80dB isolation. Frequency 5-900 MHz.
PAGE 161
CALRAD 75 Series - tools & antennas 75-804 XM SatELLItE raDIO aDaPtEr rf tO SMB tELESCOPING aNtENNaS 75-469 ..................... 6-Section 3 ft. Extended 1 8 /2" Collapsed 90-945 rOtarY COaXIaL StrIPPING tOOL 75-471 CB tELESCOPING aNtENNa Prepares cable for RG-58, RG-59/62, RG-6. No replacement cassettes needed. Includes hex wrench for adjusting cutting blades. Stripping distance 4mm, 6mm, 8mm, 12mm. 75-724 SECUrItY SHIELD tOOL 10-Section, coil loaded. Excellent CB replacement antenna.
PAGE 162
CALRAD 75 Series - rf Connectors “f” CONNECtOrS & aDaPtErS 75-493-ID Ivory Designer 75-493-WD White Designer 75-493-SS Stainless steel wall plate with single “F” connector. Wall Plates with Dual F-81 Connectors. 75-735-IV 75-735-W Satellite, TV wall 75-489-ID Ivory Designer plate built-in diplexer 2 GHz Versions with 75-489-IV Ivory TV ant., satellite 75-489-IV-2 Ivory and 4 conductor 75-489-W White telephone jack. 75-489-WD White Designer 75-489-WH-2 White Available in ivory or white.
PAGE 163
CALRAD 75 Series - Video & rf Connectors “f” CONNECtOrS & aDaPtErS . . . continued 75-539 Adapter for TV, video and cable. Female F-81 Jack to Male 3.5 mm mini plug. 75-604 Chassis mount “F” Female connector. Mounts from rear with hardware. Mounts in .375” chassis hole. 75-519 F-61A type chassis connector. Female "F" mounts in .375" chassis hole with nuts & washer. 75-625 Right angle PC mount F connector with long shaft. 75-626 Right angle PC mount ‘F’ connector with short shaft. Mounts in .
PAGE 164
CALRAD 75 Series - Video & rf Connectors & accessories Technical drawings and specifications are available for these products. Please ask your Calrad sales representative for details. ****Please Note: for 75-533-PS & 75-534-PS Series, images and specifications are subject to change**** Water resistant Compression Style Connectors. These easy to use compression style connectors are the perfect solution for your coaxial broadband network needs.
PAGE 165
CALRAD 75 Series - Video & rf Connectors BNC CONNECtOrS & aDaPtErS HIGH QUALITY BNC CONNECTORS Perfect for HDtV applications 75-800G-50 75-801G-50 50 ohm. 50 ohm. RG-179 solder BNC connectors gold with black chrome body with rubber strain relief. .12” cable opening. For use with Calrad RGB cable 55-612B. 75-800G-75 75-542 75-542G (Gold) Gold BNC Male for RG-58/U and RG55/U cables. Solder style. 75 ohm. RG-59 solder BNC connectors, gold with black chrome body. .255” cable opening.
PAGE 166
CALRAD 75 Series - Video rf Connectors BNC CONNECtOrS & aDaPtErS . . . continued right angle Water resistant Compression Style Connectors Nickel Version 75-533-PSBNCra RG59 75-534-PS-BNCra RG-6 Gold Version 75-533G-PSBNCra RG59 75-534G-PSBNCra RG-6 75-559-St-75 75 ohm version 75-559-St 50 ohm version Solderless BNC Male connector for use with RG-59 coax cable. Cable opening .24”. Black snap style plastic body.
PAGE 167
CALRAD 75 Series - Video rf Connectors Technical drawings and specifications are available for these products. Please ask your Calrad sales representative for details. BNC CONNECtOrS & aDaPtErS . . . continued 75-514 BNC Female, isolated ground from chassis. Length is 1.06”. Mounts in .37” chassis hole. Bushing length .38”. 75-548 75-515 BNC Female, chassis-mount. Length is 1.08”. 75-685 BNC Female chassis mount jack for RG-174U cable. 75 ohm. Fits in a 1/2” “D” hole. Bushing length .
PAGE 168
CALRAD 75 Series - Video rf Connectors, tNC, PaL Technical drawings and specifications are available for these products. Please ask your Calrad sales representative for details. 30-465 30-467 30-468 30-475 Coax cable connector plug. PL-259 S0-239 Coax chassis connector (box-type). S0-239 Coax chassis connector (bullet-type). 5/8” hole size. Coax adaptor plug. Adapts S0-239 type to 3.5 mm jack. for New Product Information Please Visit Us at: www.calrad.
PAGE 169
CALRAD 75 Series - rf Connectors, Mini UHf, N, SMa Technical drawings and specifications are available for these products. Please ask your Calrad sales representative for details. MINI UHf CONNECtOrS & aDaPtErS 75-615 Mini UHF Male crimp connector, 3 piece for RG 58, nickel plated. 75-615-BK “N” CONNECtOrS & aDaPtErS 75-618 75-616 75-617 Mini UHF Female coupler. Overall length: 1.29”. Mini UHF Male to Female right angle coupler. Mini UHF Male crimp connector, 2 piece for RG 58.
PAGE 170
CALRAD 80 Series - Preamps, Cleaning Products Technical drawings and specifications are available for these products. Please ask your Calrad sales representative for details. 80-575-H 80-575-M HEaDPHONE aMP MICrOPHONE PrE-aMP 80-575-L 80-575-P LINE PrE-aMP PHONO PrE-aMP Select from 4 standard stereo configurations. A few components are easily changed on the PC board for each preamp. The unit is available in a chassis, or completed circuit board with labeled black face plate. Includes DC power adapter.
PAGE 171
CALRAD 80 Series - audio & Video Cleaning Kits 80-410 MOUSE CLEaNING KIt Comes complete with cleaning solution, 5 cleaning chamois, and circular cleaning brush tool. 80-408 GaME CONSOLE aND CartrIDGE CLEaNING KIt Comes complete with cleaning solution and 3 cleaning cards. For use with Sega consoles and game cartridges. 80-412 GaME CLEaNEr Cleans game cartridges and game unit slots, removes dirt and oxidation restoring contact points to normal operation.
PAGE 172
CALRAD 85 Series - Knobs & Dials MULtI-COLOrED KNOBS Black base with color caps available in 15 different colors, /4" I.D. brass bushing. 9 /16" DIAMETER 9 /16" HIGH 85-590.............Red 85-591............Grey 85-592.........Yellow 85-593 .........Green 85-594 ............Blue 85-561 Black, bakelite knob with chrome insert, fluted grip. 1 /4-inch brass bushing with set screw. 3 /4" Diameter, 9 /16" high. 85-567 Chrome-skirted instrument knob. Calibrated 0–9.
PAGE 173
CALRAD 90 Series - test Lead Clips, alligator Clips & Battery Holders 90-781 tESt LEaD SEt Features 5 color-coded leads, terminated with wire hooks for hands free testing. 5 colors: Black, Green, Red, White and Yellow 90-767 tESt CLIP SEt Thin wire kit of 10 leads, 15" long. Miniature insulated alligator clip each end. (2 each of 5 colors: Black, Green, Red, White and Yellow) #27 awg wire. 90-764 Same as 90-767, but with medium weight clips and wire. Colors: Black, Green, Red, White and Yellow.
PAGE 174
CALRAD 90 Series - Battery & fuse Holders, Speaker terminals 90-745 “aaa” BattErY HOLDErS Made of durable plastic shell and nickel plated contacts to stop corrosion from battery acid. All have 6 inch leads (red and black). 90-745 .1 cell holder (less batteries) 90-746 .2 cell holder (less batteries) 90-747 .4 cell holder (less batteries) 90-780 SafEtY fUSE HOLDEr Panel mounting for 3AG-type fuses. 3 19 Fits in panels up to /16" thick, /32" 3 mounting hole. Overall length 1 /4" 15 behind panel 1 /16".
PAGE 175
CALRAD 90 Series - Speaker terminals & accessories 90-758 Banana Plug & Binding Post terminal Strip gold terminals with plastic screw nut with red and black identification bands Size: 21/8” (L) X 15/16”(W) 90-741 SPEaKEr tErMINaL CUP 21/2" x 31/8" size. Has spring loaded connectors. Red and black posts. Spade lug or solderable rear terminals. 90-758G All Gold Terminal Version Dual Banana/Speaker Terminal Strip. Accepts either standard banana plugs or speaker wire up to 10 AWG.
PAGE 176
CALRAD 90 Series - rubber feet, Chassis Boxes & tools 90-794 rUBBEr fEEt Adhesive-backed molded bumpers apply instantly. Just peel off backing and apply to any dry, clean surface. 4 per pkg. Size: 0.129"(H) x .520"(sq.) 90-795 Same as 90-794 only larger. Size: 0.300"(H) x .880"(sq.) 90-796 rUBBEr fEEt Adhesive-backed molded bum-pers apply instantly. Just peel off backing and apply to any dry, clean surface. 4 per pkg. Size............... 0.400" Ht. x .880 dia.
PAGE 177
CALRAD 90 Series - tools 90-844 7-PIECE COMBO SEt Screwdrivers are made of hardened and tempered molybdemum steel. Black point blades are against reflection of light, swivel top is suitable for miniature work..Contains: slotted; 1.4 - 2.0 - 2.4 - 3.0 x 40mm & phillips’ 0.3 - 0.2 - 0 x 40mm 90-828 3-PIECE LONG-HaNDLE SCrEWDrIVEr SEt Fine sharp point, curved tip, general point tip, and flat tip. Comes with carrying pouch.
PAGE 178
CALRAD 90 Series - tools 90-804 10 PIECE PLaStIC aLIGNMENt tOOLS 90-925 SOLDErING IrON StaND WItH SPONGE 4.5” long molded plastic rods with various types of tips: slotted, hexagon, and square. Easy grip handles. Works with Calrad soldering irons 90-921 and 90-923 90-850 MICrO fLat NOSE PLIEr WItH INSULatED GrIP 90-900 tEMPEratUrE CONtrOLLED SOLDErING StatION 90-853 MICrO LONG NOSE PLIEr WItH INSULatED GrIP 90-903 BUtaNE GaS tOrCH WItH CEraMIC HEaD Comes with different tips for all styles of work.
PAGE 179
CALRAD 90 & 99 Series - tools, tape & Cigarette Lighter Plugs 90-856 PrECISION WOrK HOLDEr WItH 1.75” MaGNIfYING GLaSS 90-787 HIGH INSULatION ELECtrICaL taPE Plastic electrical tape consists of high dielectric strength and flexible stretch, snug wrap, waterproof. Will resist oil, gasoline, water, salt water, alkalis and sunlight. 3/4" wide, 60 ft. UL approved. Adjustable heads with 6 ball joints for all angles, locks at any angle. Alligator spring clips for easy use.
PAGE 180
CALRAD 90 Series 90-610 CIGarEttE LIGHtEr PLUG Snap-together case with single screw nut for fast easy replacement. Easy access solderless terminals. Single finger ground system. Accepts up to 16 awg cable. Over all length: 2.86”. Spring loaded tip. 90-611 CIGarEttE LIGHtEr PLUG 2-ear version for better ground connection. Fuse protected, complete with 5 amp fuse. Accepts up to .25” O.D. cable. Over all length: 3.3”. Rubber strain relief. Color black.
PAGE 181
CALRAD 90 Series - Cigarette Lighter, Cable assemblies 90-605 15 aMP CIGarEttE LIGHtEr PLUG WItH rEtraCtaBLE CaBLE Black, heavy duty 18 AWG coiled cable. Extends to 15 ft. Fits most automotive lighter sockets. Adds portability to your electronic equipment either inside or outside of vehicle. 3 amp fuse. rated up to 15 amps. Black cable. Stripped and tinned leads. 90-607 CIGarEttE LIGHtEr PLUG WItH CaBLE Fits most automotive lighter sockets. 32” black 18awg. cable. No fuse protection.
PAGE 182
CALRAD 90 Series - Cable ties, Cable tie tools CaBLE tIE PrODUCtS These tie products are manufactured of 100% non-corrosive, Type 6/6 Nylon. They meet MILS-23190, MS 3367, ASTM D4066-82, and are recognized under the component program of the Underwriter's Laboratories, Inc. (File No. E 37800). All products are Self-Extinguishing UL 94 Flam., Class: V-2. They are stocked in natural and weather-resistant, heat-stabilized black. Other colors are available upon request as noted on illustrations.
PAGE 183
CALRAD 90 Series - Digital Calipers & Wire Conduit 90-913 0-100MM ELECtrONIC DIGItaL SILVEr CaLIPErS Measuring range: 0-75mm / 0-3”, 0-100mm / 0-4”, 0-150mm / 0-6”, 0-200mm / 08”, 0-300mm / 0-12”. Resolution: + -0.01mm / 0.0005” Measuring system: Linerar Capacitive, display LCD, Power 1.5 button cell.An ideal tool for a broad range of industrial and automotive applications.
PAGE 184
CALRAD 90 & 92 Series - L.E.D. Lighting 90-701-XLr-ra PrO-aUDIO LaMP WItH 8 L.E.D LIGHtS 90-702 CIGarEttE LIGHtEr LaMP WItH 8 L.E.D. LIGHtS Perfect for mixing consoles or desk top, public address usage. Terminates to a male XLR connector. Over 50 year Avg. L.E.D lamp life. Material color: Black. For use in Car's or truck's. Provides a bright pure white light for reading. Never gets hot, easy to handle and operate. Terminates to a male cigarette lighter connector with ON/OFF switch. Over 50 year Avg. L.E.
PAGE 185
CALRAD 92 series - L.E.D. Lights & Holders 92-111 rECESSED PaNEL MOUNt HOLDEr (BLaCK) fOr 5 MM-LarGE LEDS Fits into /16" hole with mounting hardware. LED not included. /8” depth overall. 5 5 92-110 PaNEL MOUNt HOLDEr (BLaCK) fOr 5 MM-LarGE LEDS Fits into /16" hole with mounting hardware. LED not included. /8” depth overall. 5 5 92-115 (red) 92-116 (Green) PaNEL MOUNt SELf fLaSHING L.E.D’s Fits into /16" hole with mounting hardware. 36” leads, 5-15V DC, Current draw 20-30ma.
PAGE 186
CALRAD 92 Series - Ir Distribution 92-160 Ir DIStrIBUtION SYStEM IR Connecting hub with a wired receiver that terminates to a 3.5mm stereo plug. A terminal block is also provided to support wired type receiver connections if needed. Designed to simplify the connection of IR receivers and emitters for IR signal distribution. The 92-160 has the ability to send IR signals to 6 sources using a single emitter or 12 or more sources if double or triple IR emitters are used.
PAGE 187
CALRAD 92 series - Ir Distribution 92-170-KIt Ir Distribution Over Coax Injector-Coupler System 92-170 Injector 92-170 Coupler The 92-170 IR injector and coupler system sends remote control signals to your satellite dish, cable box, or DVD using a standard IR remote, even if the component you wish to control is located in another room. The Calrad RF/IR Injector delivers your IR signals over a single coaxial cable up to 300 feet to the actual component. Attach Calrad's IR 92-165 receiver using the 3.
PAGE 188
CALRAD 95 Series - alarms & Keypads 95-600 6 ZONE aLarM SYStEM WItH L.E.D. KEYPaD 95-800 8 ZONE aLarM SYStEM WItH L.E.D. KEYPaD Burglar and Fire Alarm control panels are ideal for light residential and commercial use. The small keypad with its large, illuminated tactile buttons make entering commands easy in low lighting conditions. Removable front door on control panel for easy wiring and access. Built-in power supply and digital communicator. Unit comes with (1) control panel, (1) L.E.D.
PAGE 189
CALRAD 95 Series - A\V Baluns & Security Accessories 95-1040 RCA Composite Version 95-1045 SVHS Version AUDiO & ViDEO BALUN CAT-5 CABLE SySTEm Transmit stereo audio and composite video up to 1000 ft using CAT-5e cable. The advantages of the system are: clear video signal, fewer cables to manage, lowercost per connection, centralized wiring for greater control. Video bandwidth 12MHz, Audio 20Hz-15KHz. Two units required for transmission and reception of balanced signals. Size: 2.2” (W) x 1” (H) x 3.5” (D).
PAGE 190
CALRAD 95 Series - Security Accessories 95-920 WiNDOW BUG SENSOR Dry circuit, no power required. Protects up to 32 square feet. Adjustable operation for N/O, N/C circuit. Automatic reset . Peel and stick mounting. Available in white and gray. Provides good visible deterrent. 95-405 iNFRARED DOOR ANNOUNCER This door announcing device emits a continuous, invisible infrared beam to the reflector and returns it to the receiver.
PAGE 191
CALRAD 95 Series - Security System Timers & modules Detailed specifications are available for these products upon request. 95-904 24-HOUR PANiC & FiRE CONTROL mODULE 95-840 LOW CURRENT RELAy mODULE This unit switches a set of dry contacts DPDT rated at 5 amps @250Vac, 30Vdc. Supply Voltage, programmable 6/12/24Vdc. Current draw, 70mA when relay is active Minimum pull voltage +/- 20% of operating voltage. LED power indicator. Mounts with foam tape. Size: 2.48”(L) x 1.89”(W) x .
PAGE 192
CALRAD 95 Series - Security Accessories Detailed specifications are available for these products upon request. 95-848 DiGiTAL CUT-OFF TimER This unit can turn off a ringing bell or siren, can be used as a N/C , N/O delay relay for use as a dry contact switch to delay or remove a contact closure. Requires 6–12 Vdc to operate. Specifications Relay Contacts................3 Amp Max. Current Drain...........................25 mA Adjustable Relay Time 1 sec–10 min.
PAGE 193
CALRAD 95 Series - Security Accessories 95-823 TRiPLE LATCHiNG DOOR/GATE ACCESS DiGiTAL KEy PAD 20-312 SiREN HORN 95-824 Heavy Duty Sealed Environment Surface mount Weatherproof Self Contained Access Control Key pad 6 / 8 / 10 iNCH BELLS Same unit as 20-310 except features built-in siren amplifier. 30 Watts, Operates on 6–12 Vdc, our most powerful siren horn, has wiring for both steady and yelp siren operation. 120 dB at 6ft. Horn Dimensions: 43/4" x 8" x 91/4" (deep), Color: white.
PAGE 194
CALRAD 95 Series -- Relays & Amplifiers, Paging Amplifiers 95-925 12 Volt SPDT ALARm RELAy 30/40A contacts. Current draw 120mA. Coil resistance 93 ohms DC. Can be used with Calrad 95-926 or 95-927 relay sockets. 95-926 SiNGLE RELAy SOCKET FOR CAR ALARmS Mates with 95-925 12V relay. 95-869B 6-WATT AUDiO AmPLiFiER mODULE Solid-State Audio Amplifier Module with max 5 watt output. Specifications Power Supply Voltage ....... 12-15 V Frequency Response 10 to 25 KHz. Input Impedance ..................
PAGE 195
CALRAD 95 Series - Stereo Amplifiers & Preamps 95-2020 45 WATT STEREO AUDiO AmPLiFiER Small, powerful stereo amplifier is perfect for professional and consumer audio applications. Front panel mounted left and right volume controls. Comes with passive heat sink (no fan required) illuminated On/Off rocker switch. Stand alone unit or fits Calrad 4 X 1/4 rack unit p/n 95-2024A. REAR VIEW SPECiFiCATiONS Inputs:....................... 1/4” Stereo Jack x 1 (rear) Output:.......................
PAGE 196
CALRAD 95 Series - Touchscreens 10.4” TOUCH SCREENS 95-1062-BK (Black USB) 95-1062-BK-KiT (iNWALL KiT, BLACK TRim PANEL) 95-1062-WH (WHiTE USB) 95-1062-WH-KiT (iNWALL KiT, WHiTE TRim PANEL) 95-1062BK-RS232 (BLACK RS232) 95-1062WH-RS232 (WHiTE RS232) The 95-1062 series touchscreens can be used on a desktop or in-wall applications. Perfect for use with point of sale products or home automation control systems. Easy to setup driver software, available in USB or RS232 interfaces.
PAGE 197
CALRAD 95 Series - AC Plugs, Wall Adapters, Splitters 95-790 CHASSiS mOUNT AC RECEPTACLE Solder type, 3-prong (grounding type) jack. Snap-in mounting. UL approved. 15A/125V. Mounts in 1.06”(W) x .87”(H) hole. Overall depth 1.28”. Black plastic body. 95-791 CHASSiS mOUNT AC RECEPTACLE 95-771 FEmALE AC SOCKET Solder type, recessed female AC panel jack. 10A at 250Vac. Black plastic body. US and CSA approved. Mounts in 1.27”(W) x .96”(H) hole. Overall depth 1.25” with 1.55” mounting centers.
PAGE 198
CALRAD 95 Series - AC Adapters, Power Strips 95-795 AC 3 WiRE GROUND ADAPTER 120 Vac - 20 amp rating. Rubber body. 95-786 9 OUTLET mODEm/TV SURGE PROTECTOR 120 Vac - 20 amp rating. Plastic body. Child protected slide outlet covers suitable for DSS dish installation. 3 transformer spaced outlets. 6-mov, 840-joules. 3 Line protection. EMI-RFI noise filtered. Built-in resettable circuit breaker. ON-OFF illuminated rocker switch. LED surge and ground fault indicator. Surge fail audible alarm alert. 6 ft.
PAGE 199
CALRAD Numerical Index 10 SERIES 10-3 10-9 10-10 10-12 10-15A 10-17 10-19 10-20 10-22 10-31 10-31-BK 10-32 10-33 10-34 10-35 10-36-6 10-36-13 10-36-19 10-36-6-BK 10-36-13-BK 10-36-19-BK 10-37 10-45-20 10-45-25 10-50 10-54 10-55 10-56 10-58 10-59 10-59A 10-60 10-61A 10-63A 10-64A 10-65 10-67-BK 10-67-GN 10-67-RD 10-67-YL 10-68-BK 10-68-BU 10-68-GN 10-68-OR 10-68-RD 10-68-YL 10-69-BK 10-69-GN 10-69-RD 10-69-YL 10-75 10-76 10-77 10-78 10-78-RCA 10-79 10-82 10-83 10-86 10-87 10-88 10-89 10-90 10-90-BAT 10-91 1
PAGE 200
CALRAD Numerical Index 30 Series to 40 Series 30-410-3-8-BK 30-410-3-8-BU 30-410-3-8-GN 30-410-3-8-OR 30-410-3-8-RD 30-410-3-8-W 30-410-3-8-YL 30-410-BK 30-410-BU 30-410-GN 30-410-OR 30-410-RD 30-410-YL 30-410G-3-8-BK 30-410G-3-8-BU 30-410G-3-8-GN 30-410G-3-8-OR 30-410G-3-8-RD 30-410G-3-8-WH 30-410G-3-8-YL 30-410G-BK 30-410G-BU 30-410G-GN 30-410G-OR 30-410G-RD 30-410G-WH 30-410G-YL 30-411 30-412-A 30-413 30-414 30-415-BK 30-415-RD 30-415M 30-416 30-416-RD 30-417 30-418 30-418G 30-419 30-419G 30-420 30-421
PAGE 201
CALRAD Numerical Index 201 40-588 40-589 40-593 40-594 40-595 40-596 40-600 40-601 40-602 40-605 40-606 40-608 40-609 40-610 40-611 40-612 40-613 40-614 40-615 40-615-W 40-616 40-620 40-621 40-622 40-6220 40-623 40-625 40-626 40-627 40-628 40-629 40-629-BU 40-629-WH 40-629-YL 40-630 40-632 40-634 40-635 40-635A 40-636 40-637 40-637-S 40-644 40-647 40-648 40-649 40-650 40-650A 40-651 40-652 40-654 40-655 40-656 40-657 40-658 40-659 40-660 40-661 40-663A 40-664 40-665 40-666 40-667 40-668 40-670 40-671 40-6
PAGE 202
CALRAD Numerical Index 55 Series 55-624-HDTV-12 113 55-624-HDTV-25 113 55-624-HDTV-3 113 55-624-HDTV-35 113 55-624-HDTV-50 113 55-624-HDTV-6 113 55-625-10 113 55-625-12 113 55-625-15 113 55-625-20 113 55-625-25 113 55-625-3 113 55-625-35 113 55-625-50 113 55-625-6 113 55-625-HDTV-10 113 55-625-HDTV-12 113 55-625-HDTV-15 113 55-625-HDTV-25 113 55-625-HDTV-3 113 55-625-HDTV-35 113 55-625-HDTV-50 113 55-625-HDTV-6 113 55-625D-10 113 55-625D-10-WH 113 55-625D-12 113 55-625D-12-WH 113 55-625D-15 113 55-625D-20
PAGE 203
CALRAD Numerical Index 55-871A-10 55-871A-10-WH 55-871A-12 55-871A-12-WH 55-871A-25 55-871A-25-WH 55-871A-250-BK 55-871A-3 55-871A-3-WH 55-871A-35 55-871A-35-WH 55-871A-50 55-871A-50-WH 55-871A-6 55-871A-6-WH 55-871F-12 55-871F-25 55-871F-6 55-872-12 55-872-15 55-872-20 55-872-25 55-872-250 55-872-3 55-872-35 55-872-50 55-872-6 55-873-BNC-12 55-873-BNC-20 55-873-BNC-25 55-873-BNC-3 55-873-BNC-6 55-873-RCA-12 55-873-RCA-20 55-873-RCA-25 55-873-RCA-3 55-873-RCA-35 55-873-RCA-50 55-873-RCA-6 55-874 55-875-12 5
PAGE 204
CALRAD 72 Series to 75 Series 72-111-100-GY 153 72-111-100-RD 153 72-111-100-WH 153 72-111-100-YL 153 72-111-15-BK 153 72-111-15-GY 153 72-111-25-BK 153 72-111-25-BU 153 72-111-25-GN 153 72-111-25-GY 153 72-111-25-RD 153 72-111-25-WH 153 72-111-25-YL 153 72-111-3-BK 153 72-111-3-BU 153 72-111-3-GN 153 72-111-3-GY 153 72-111-3-RD 153 72-111-3-WH 153 72-111-3-YL 153 72-111-5-BK 153 72-111-5-BU 153 72-111-5-GN 153 72-111-5-GY 153 72-111-5-RD 153 72-111-5-WH 153 72-111-5-YL 153 72-111-50-BK 153 72-111-50-BU 153
PAGE 205
CALRAD Numerical Index 205 75-642 169 75-645 166 75-646 166 75-650-BK-100 157 75-650-BK-25 157 75-650-W-100 157 75-650-W-25 157 75-651-W-100 157 75-651-W-25 157 75-652-W-100 157 75-652-W-25 157 75-653-W-100 157 75-653-W-25 157 75-654-W-100 157 75-654-W-25 157 75-655-W-100 157 75-655-W-20 157 75-656-BK-100 157 75-656-BK-25 157 75-656-W-100 157 75-656-W-25 157 75-657-BK-100 157 75-657-BK-25 157 75-679 166 75-680 165 75-681 165 75-682 165 75-683 165 75-684 165 75-685 167 75-686 165 75-687 165 75-687-A 165 75
PAGE 206
CALRAD Alphabetical Index AC OUTLET ACCESSORIES AC Jacks, Plugs, Adapters ....................................197-198 AC Outlet Strips ............................................................198 AC Surge Protectors AC, TV, Telephone .....................197 ADAPTERS AC & DC Power .....................................................102-104 Audio ..............................................................48-49, 51-55 Cigarette Lighter Jacks & Plugs ....................106, 179-181 Networking..........
PAGE 207
CALRAD Alphabetical Index NETWORK CAT 5, CAT5e PRODUCTS ..............148-156 CONVERTERS\SCALERS Component\Composite...................................................78 HDMI...............................................................................78 DIN COUPLERS & CABLES .........................................48 DRILL BITS ..................................................................179 EARPHONES .................................................................14 ELECTRICAL TAPE ...............
PAGE 208
CALRAD Alphabetical Index SWITCHES Audio...............................................................................70 Alarm .......................................................................99-100 Lighted ............................................................................95 Magnetic ..................................................................99-100 Push-Button ...............................................................97-98 RF .....................................................
PAGE 209
PAGE 210
PAGE 211