User's Manual

ManualsBrandsCalsonic Kansei ManualsElectronicsKeyless Entry System Transceiver

USER OPERATION INSTRUCTION (DRAFT)

INTELLIGENT KEY SYSTEM

The intelligent key uses coded radio signals to communicate with the vehicle.

When the intelligent key is near the vehicle such as in your pocket or purse.

It allows the vehicle to be locked unlocked, or started without inserting the ignition

Key. It is also possible to use the control entry function.

 CAUTION

 Be sure to carry the intelligent key with you.

 Do not leave the vehicle with the intelligent key inside.

The intelligent key may not function correctly depending on the environment

or operating conditions, if you do not use it correctly.

The intelligent key transmits faint radio waves.

 When there are strong signals coming from a television tower, power station or

a cellular phone with you.

 When the intelligent key is in contact with or covered by a metallic material.

 When radio wave-type remote control entry is used nearby.

 When the intelligent key is placed near an electric appliance such as a personal

Computer.

 The intelligent key continually consumes battery power as the key receives a

signal to communicate with the vehicles.

 Battery life is about 1.5 years, although it varies depending on the operating

conditions. When the battery of the intelligent key is lowthe green blinking

Key warning light goes out about 30 seconds after the ignition knob is turned

to ON. If the battery runs down, replace it with a new one.

 If the intelligent key receive strong signal over an extended period of time the

Battery could quickly run down. Do not place the intelligent key near an electric

appliance such as a television set or personal computer.

1. INTELLIGENT KEY OPERATION

You can lock or unlock the doors without taking the key out from your pocket or purse.

When you carry the intelligent key with you. You can lock or unlock all door by

pushing the door handle request switch or back door handle request switch within the

Summary of content (7 pages)

PAGE 1
USER OPERATION INSTRUCTION (DRAFT) INTELLIGENT KEY SYSTEM The intelligent key uses coded radio signals to communicate with the vehicle. When the intelligent key is near the vehicle such as in your pocket or purse. It allows the vehicle to be locked unlocked, or started without inserting the ignition Key. It is also possible to use the control entry function. CAUTION Be sure to carry the intelligent key with you. Do not leave the vehicle with the intelligent key inside.
PAGE 2
rang of operation. 2. Locking doors 1. Turn the ignition knob to the LOCK position and remove the ignition key if any metal key is in the ignition knob.*1,*2 2. Close all the doors.*3 3. Push any front door or the back door handle request switch while carrying the intelligent key with you *4 4. All the door , back door and fuel filter lid will lock. 5. The hazard indicator flashes twice and door buzzer sounds twice.
PAGE 3
position. To close the windows turn the drives door key lock to the vehicle for about 2 seconds after the door is locked. To stop closing turn the key to the neutral position . 4.OPERATING THE ENGINE Ignition knob positions Push in the ignition knob in the range when you turn it. LOCK(Normal parking position) The ignition knob can only be locked in the position. The ignition knob will be unlocked when it is pushed in , and turned to the ACC position while carrying the intelligent key.
PAGE 4
lead an accident and injury. Be sure to sit in the drivers seat to use the key. For important safety information, see “Starting the engine “ in the Starting and driving section. When the ignition knob is pushed under the following condition, the key warning light in the instrument (meter) panel comes on in red. It is not possible to turn the ignition knob when. you do not have the intelligent key with you The intelligent key battery has run down You have a intelligent key for another vehicle with you.
PAGE 5
If the intelligent key is in the operating range, it is possible for anyone who dose not carry the intelligent key to lock/unlock the does by pushing the door handle request switch. Operating range for engine start function The operating range for starting the engine is inside the vehicle. If the intelligent key is on the instrument panel , inside the glove box or door pocket ., or the corner of interior compartment , it may not be possible to start the engine.
PAGE 6
Replace the battery as follows. 1. Insert a flat-blade screwdriver wrapped with a cloth into the slit of the rear center and twist it to separate the upper part from the lower part. 2. Replace the battery with a new one. Do not touch the internal circuit and electric terminals as it could cause a malfunction. Recommended battery:CR2025 Make sure that the side faces the bottom of the PCB. 3. Close the lid securely. 4. Push the buttons two or three time to check its operation.
PAGE 7
FCC Notice. Changes or modifications not expressly approved by the manufacturer for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules and Regulation and the Standard RSS-210 of Industry Canada.