Quick Reference Guide
Table Of Contents
- 1Unpacking and Checking
- 2Radio Overview
- 3Operations
- 4CPS-Menu
- 5Common Setting
- 6Conventional Setting
- 6.1.1Conventional Setting-Password
- 6.1.2Conventional Setting-Zone
- 6.1.3Conventional Setting-Channel-Digital Channel
- 6.1.4Conventional Setting-Channel-Analog Channel
- 6.1.5Conventional Setting-Multi CTC/CDC
- 6.1.6Conventional Setting-Contact
- 6.1.7Conventional Setting-Network-Network
- 6.1.8Conventional Setting-Network- Local Access Managem
- 6.1.9Conventional Setting-Network-Multisite Access Mana
- 6.1.10Conventional Setting-Network-Application Programmi
secret▲
All rights reserved.No spreading abroad without permission of Caltta.
10
Return
Up
Menu/Confirm
Down
Programmable
button 1
Programmable
button 2
Channel/Volume
Switch
3 Operations
3.1Powering On/Off
3.1.1 AC Power Supply
When the repeater is turned off , press the back panel (AC power switch )to turn
on the power,the AC power indicator lights up, and then press the front panel (power
button) to power on the repeater .The “PWR” indicator lights up, and the LCD will enter the
operation interface after the system is working normally.
When the repeater is turned on, press (power button) to turn off the repeater ,
and press (AC power switch )to turn off the AC power.
3.1.2 DC Power Supply
When the repeater is turned off ,press the front panel (power button) to power on
the repeater .The “PWR” indicator lights up, and the LCD will enter the operation interface
after the system is working normally.The “PWR” indicator lights up, and the LCD will enter
the operation interface after the system is working normally.
When the repeater is turned on, press (power button) to turn off the repeater .