Quick Reference Guide

secret▲
All rights reserved.No spreading abroad without permission of Caltta.
25
Default value is Temperature Control.

Fan on User Temperature
This option allows users to set the temperature to turn on the fan if the fan is
controlled via temperature. When the work temperature of the radio is higher than the
preset temperature threshold, the fan will be turned on automatically in order to protect the
radio.
Rang：10~80℃,step 1℃,Default Value is 50℃.
 Fan Off User Temperature
This option allows users to set the temperature to turn off the fan if the fan is
controlled via temperature. When the work temperature of the radio is lower than the
preset temperature threshold, the fan will be turned off automatically in order to protect the
radio.
Rang：10~80℃,step 1℃,Default Value is 40℃.
5.2.2 Common Setting-UI Setting-Backlight
Backlight
 Backlight
This parameter sets whether to automatically turn off the backlight of terminals with a
LCD, and the time before the backlight is automatically turned off after being turned on.
Options: 5-60 s (step: 1 s) or Always On or Disable. Default: Always On.
 Brightness
This parameter sets the brightness level when the backlight is turned on.
Options: 0-6s, default: 4s.
5.2.3 Common Setting-UI Setting-Button
Button
 Long Press Duration(s)
This parameter sets the minimum duration that you shall press and hold a button to
trigger the long press function.
Options: 0.5 s to 5.0 s. Step: 0.5 s. Default: 2.0 s.
 P1 Short