Quick Reference Guide

secret▲
All rights reserved.No spreading abroad without permission of Caltta.
29

CPS Read Lock
This parameter sets whether to enable the CPS reading password function.
Default: disabled.

Modify Read Password
If the CPS Read Lock parameter is enabled, you can click this button to modifythe
CPS reading password, which consists of 1 to 8 digits.
Factory default password: 88888888.

Read Password Retry
If the number of times that you enter incorrect CPS reading passwords consecutively
exceeds this value, you cannot perform the CPS reading operation on your terminal. You
can only restore to default factory settings to reset the CPS reading password.
Range: 1-255 (step: 1) or Infinite. Default: Infinite.
6.1.2 Conventional Setting-Zone
 Zone Alias
The Zone alias allows the user to define a unique name for each Zone. The maximum
length is 14 characters,minimum length is one character.
 Available
The table displays the available channels or channels which may not be programmed
for you to add into a zone. Available channels are related to the channels in the device.
 Members
The table displays existing channels in the current zone. These channels which may
not be programmed come from the Available channel list on the left.
6.1.3 Conventional Setting-Channel-Digital Channel
 Channel Alias
Users can set a unique name for each channel.Such as D456.150.
 Color Code
Color code is used to identify a system. User who wish to communicate with each
other are assigned with the same color code. Range:0~15.
 Slot
This option is used for local PTT to transmit signals.
 IP Multi-site Connect