Quick Reference Guide
Table Of Contents
- 1Unpacking and Checking
- 2Radio Overview
- 3Operations
- 4CPS-Menu
- 5Common Setting
- 6Conventional Setting
- 6.1.1Conventional Setting-Password
- 6.1.2Conventional Setting-Zone
- 6.1.3Conventional Setting-Channel-Digital Channel
- 6.1.4Conventional Setting-Channel-Analog Channel
- 6.1.5Conventional Setting-Multi CTC/CDC
- 6.1.6Conventional Setting-Contact
- 6.1.7Conventional Setting-Network-Network
- 6.1.8Conventional Setting-Network- Local Access Managem
- 6.1.9Conventional Setting-Network-Multisite Access Mana
- 6.1.10Conventional Setting-Network-Application Programmi
secr et▲
All rights reserved.No spreading abroad without permission of Caltta.
31
This option allows users to set the CTCSS tail reversion phase for the current
channel.
Repeater Mode
This option allo ws users to set the repeater mode for the c urrent channel.
Rx
Receive Frequency[MH z]
This option allows users to s et a frequency for the current channel to receive signals.
Range:136-174MHz.
RX Squelch Mode
This option allo ws users to set the Rx squelch m ode for the current channel.
RX CTCSS/CDCSS Type
This option al lows use rs to set the CTCSS/CDCSS type for the cur
rent channel.When
the host receives a signal, it first checks whether the received CTCSS/CDCSS type
matches the CTCSS/CDCSS type set for the channel. The host processes the received
signal only when they are matched.
RX CTCSS Frequency[Hz]
This option allows users to s et the Rx CTCSS freque ncy for the current channel. The
CTCSS frequenc y is the signaling that is loaded in the carrier and is lower than the audio
frequency. Range: 136-174MHz.
RX CDCSS Code
This option allows users to s
et the Rx CDCSS code for the current chann el. The
CDCSS code is the signaling that is transmitted at the speed of 134.4 bit/s in the carrier
and is lower than the au dio frequency.When RX CTCSS/CDCSS Type is set to CDCSS,
Range:D023 N ~D754N.When RX CTCSS/CDCSS Type is set to CDCSS Invert,
Range:D023 I~D 754I.
Carrier Squelch Level
This option allo ws users to set the squelch level for the current channel.
TX
Transmit Frequency[MHz]
This option allo ws users to set a frequency f
or the current channel to transmit signals.
Range:136-174MHz.
Power Level