OPERATORS MANUAL for MX, MXD and Wall Mount Style Models MX and MXD Models Features Cat pump Features General pump Models are: 1000MX, 1500AMX, 1500MX and 20005MX Models are: 1000MXDS, 1500AMXDS, 1500MXDS and 20005MXDS Wall Mount Style Models Models offered are: 1000WM and 1500WM with painted frame 1000WM/SS and 1500WM/SS with stainless steel frame.
Thank You... .....for selecting our products. Our personnel have proudly made every effort to ensure that your new Pressure Washer is of the quality that you expect. But things do occasionally go wrong. This is why every pressure washer is covered by a limited warranty. Among other things this warranty provides for the replacement of parts found to be defective during the operation of your new pressure washer. Please note that the owner/operator has certain obligations under the terms of the warranty.
WARNING The following warnings must be followed, Failure to follow these warnings could result in serious personal injury or death! Never allow children or untrained personnel to operate machinery. Electrical equipment can cause shock and sparks. Do not bypass or remove the grounding prong in any electrical plug. Keep electrical plugs, connections and cords out of water and moisture. Refer to instructions prior to equipment operation. Disconnect from power source before servicing.
Initial setup and operation of your new pressure washer Inspection for freight damage. When you receive your pressure washer be sure you check for concealed freight damage. Any damage should be noted with the delivering carrier. If you have any questions related to freight call the 800 number listed in the front of the manual. Inspection Check oil levels in the pump. Failure to check levels will result in equipment damage.
During Operation Nozzles The pressure was set at the factory during the testing procedure, no adjustments to the machine should be required for operation. During operation do not leave the machine running for more than 2 minutes without the trigger gun being pulled. Although your machine has a by-pass valve on it and may have a thermal relief system, this can cause extensive pump damage. If machine will not be discharging water for more than 2 minutes, shut the machine off.
Shut down procedure Storage 1. Turn off the power switch on the pressure washer. 2. Relieve pressure on line by pulling trigger gun. 3. Shut off water supply and disconnect garden hose. 4. Be sure to check for water leaks or oil leaks that should be repaired before the next operation. 5. If you are going to store the machine for extended period of times in cold climates be sure to antifreeze the equipment.
MX and MXD Gun Wand Assembly Wall Mount Gun Wand Assembly Part Number Description 542081 MX and MXD Gun Wand Half 542082.1 MX and MXD Wand Half 510065 1/4” Quick Coupler for All units 510100 O-Ring for 1/4” Quick Coupler and Twist Fast for All units 509372 Wall Mount Gun 509370 Wall Mount Lance Replacement Quick Tips For All Units Flow 2.0 GPM 2.0 GPM 3.0 GPM 3.
2SFX PUMP 7500X UNLOADER PARTS LIST ITEM 402 404 408 410 412 414 415 425 428 429 430 435 436 440 441 442 443 444 446 455 460 465 PART NUMBER CAT 540081 CAT 31047 CAT 32094 CAT 107672 CAT 45694 CAT 20184 CAT 14190 CAT 107673 CAT 13969 CAT 14759 CAT 107675 CAT 45696 CAT 107680 ---------------CAT 13963 CAT 13969 CAT 541060 CAT 45924 CAT 13969 CAT 45865 CAT 107681 CAT 46140 CAT 45983 CAT 45929 CAT 32097 466 468 485 486 487 Cat 7140 CAT 7135 CAT 34600 CAT 34576 DESCRIPTION CAP, HEX ADJUSTING NUT, LOCKIN
TT Series (Gas / Electric) This pump uses 30 wt. oil Electric Flange Gas Flange PARTS LIST Pos. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 Code 55120122 N/A 98204100 98221800 96693800 99194300 N/A N/A N/A N/A N/A 90384700 N/A N/A 51080070 N/A N/A N/A N/A 97596800 98210300 92221600 96700800 51040009 Description Kit No.