Spec Sheet

Cam Spray Model 1500SHDE SH Series Oil Fired Hot Water Pressure Washer
• Triplex plunger pump with ceramic plungers and stainless steel valves
• Adjustable pressure
• Adjustable thermostat
• Pressure pop-o
• Chemical injecon
• Totally enclosed fan cooled motor
• Powder coated 2 inch steel tube frame with wand/hose rack (U.S. Manufactured)
• 13” res
• Easily replaceable schedule 80 coil with stainless cold wrap (U.S. manufactured)
• Unit can be operated as either a cold water only or hot water unit
• Laser cut logo on frame; private label available
• Wet steam opon available: Call for Pricing
• Look for oponal accessories like the swivel hose reel (526496.KIT) that mounts to the frame
• Assembled in USA
• All hot water machines must be properly vented if operated indoors
Product Specicaons:
• Operang Pressure in psi/bar : 1500 / 103.5
• Flow Rate in gmp/lpm : 3 / 11.46
• Horsepower : 3
• Voltage/Amperage/Phase : 230 volt / 20 Amp / 1 ph
• 3 Phase Available: Call for Pricing
• Pump Thermal Protecon : Mechanical
• Maximum Pump Inlet Water Temperature : 140° F
• Hose Dimension : 50’ x 3/8”
• Gun/Wand/Tip: Trigger gun/dual wand with side handle and soap p, interchangeable ps in
0°, 15°, 25° and 40° pressure nozzles
• Power Cord : 35’ with GFCI
• Burner Fuel Tank Capacity : 5 gallon
• Burner Fuel Type : #1, #2 Diesel, Kerosene or JP8
• Product Dimension: 34” L x 27” W x 47” H
• Ship Weight : 355 lbs.
Cam Spray • 520 Brooks • Iowa Falls, IA 50126
Phone: [phone] • Toll Free: 800-648-5011 • Fax: [phone] • Email: [e-mail]