Install Drawing

Description: 25° Thrust angle for maximum pulling power
with a forward jet to bore through plugged lines. As more
rear jets are added to the pattern the distance range increases
and forward boring power is reduced.
Pattern: 1 forward jet & 3 rear jets
Description: 45° Flushing angle with good pulling power.
Good general purpose cleaning nozzle.
Pattern: 6 rear jets
Description: A general purpose dual angle nozzle combining
the forces of both thrust and flush for superior pulling and
cleaning power.
Pattern: 6 rear jets, half @ 45° & half @ 25°
1 forward (optional)
Description: 25° Thrusting angle with 3 forward jets for
loosening hard grease or ice. Use for forward cleaning or
pushing debris forward where maximum distance is required.
Pattern: 6 rear jets @ 25° (available only on BN style)
3 forward jets @ 10°
Spray Patterns For Four Pack
Laser
Ram
STYLE
LAS
RAM
MON
DEG
STYLE
THREAD SIZE
-
PSI FLOW
_ _ _ _ _ _ _ _ __ _ -
.
EXAMPLE
LAS38-4000.04
Monster Mole
High Thrust Degreaser
1. pick the style you want (i.e LAS)
2. pick your thread size of your hose (i.e 3/8” = 38)
3. detemine the psi of your machine (i.e. 4000)
4 determine the GPM of your machine (i.e. 4 GPM = 04)