User's Guide Part 1
Table Of Contents
- Cambium PTP 700 Series User Guide
- Contents
- About This User Guide
- Contacting Cambium Networks
- Purpose
- Cross references
- Feedback
- Important regulatory information
- Radar avoidance
- USA and Canada specific information
- Renseignements specifiques aux USA et au Canada
- EU Declaration of Conformity
- Application firmware
- Specific expertise and training for professional installers
- Avoidance of weather radars
- External antennas
- Antennas externes
- Ethernet networking skills
- Lightning protection
- Training
- Problems and warranty
- Security advice
- Warnings, cautions, and notes
- Caring for the environment
- Chapter 1: Product description
- Overview of the PTP 700 Series
- Wireless operation
- Ethernet bridging
- TDM bridging
- System management
- FIPS 140-2 mode
- Chapter 2: System hardware
- Outdoor unit (ODU)
- Power supply units (PSU)
- Antennas and antenna cabling
- Ethernet cabling
- PTP-SYNC unit
- GPS receiver
- Network indoor unit (NIDU)
- Chapter 3: System planning
- Typical deployment
- Site planning
- Grounding and lightning protection
- Lightning protection zones
- Site grounding system
- ODU and external antenna location
- ODU ambient temperature limits
- ODU wind loading
- Hazardous locations
- PSU DC power supply
- PSU location
- PTP-SYNC location
- GPS receiver location
- NIDU location
- Drop cable grounding points
- LPU location
- Multiple LPUs
- Radio spectrum planning
- Link planning
- Planning for connectorized units
- Configuration options for TDD synchronization
- Data network planning
- TDM network planning
- Network management planning
- Security planning
- System threshold, output power and link loss
- Data throughput capacity tables
- Chapter 4: Legal and regulatory information
- Cambium Networks end user license agreement
- Definitions
- Acceptance of this agreement
- Grant of license
- Conditions of use
- Title and restrictions
- Confidentiality
- Right to use Cambium’s name
- Transfer
- Updates
- Maintenance
- Disclaimer
- Limitation of liability
- U.S. government
- Term of license
- Governing law
- Assignment
- Survival of provisions
- Entire agreement
- Third party software
- Compliance with safety standards
- Compliance with radio regulations
- Type approvals
- FCC/IC compliance
- FCC product labels
- Industry Canada product labels
- 4.9 GHz FCC and IC notification
- Utilisation de la bande 4.9 GHz FCC et IC
- 5.1 GHz FCC notification
- 5.2 GHz and 5.4 GHz FCC and IC notification
- Utilisation de la bande 5.4 GHz FCC et IC
- 5.8 GHz FCC notification
- 5.8 GHz IC notification
- 5.1 GHz band edge channel power reduction
- 5.2 GHz band edge channel power reduction
- 5.4 GHz band edge channel power reduction
- Réduction de puissance aux bords de la bande 5.4 GHz
- 5.8 GHz band edge channel power reduction
- Réduction de puissance aux bords de la bande 5.8 GHz
- Selection of antennas
- European Union compliance
- Cambium Networks end user license agreement
Chapter 2: System hardware GPS receiver
GPS receiver part numbers
Order GPS receivers and associated components from Cambium Networks (Table 40).
Table 40
GPS receiver component part numbers
Cambium description
Cambium part number
Trimble Acutime™GG GPS receiver WB4141
PTP-SYNC <-> Trimble Adapter Cable (*1) WB3961
1000 ft Reel Outdoor Copper Clad CAT5E (*2) WB3175
328 ft (100 m) Reel Outdoor Copper Clad CAT5E (*2) WB3176
Tyco/AMP, Mod Plug RJ45, 100 pack (*3) WB3177
Tyco/AMP Crimp Tool (*3) WB3211
Cable Grounding Kits For 1/4" And 3/8" Cable (*4) 01010419001
LPU End Kit PTP 250/300/500 (*5) WB2978D
(*1) This adapter cable is included with the GPS receiver (part number WB4141).
(*2) Other lengths of this BBDGe drop cable are available from Superior Essex.
(*3) The RJ45 connectors and crimp tool only work with Superior Essex type BBDGe cable.
(*4) One grounding kit is required per drop cable grounding point.
(*5) One LPU kit is required per GPS receiver.
Twelve way circular connector
As an alternative to the GPS adapter cable, the drop cable can be connected directly to the GPS
unit via a 12 way circular connector, using the components and tools listed in Table 41.
Table 41
Recommended outdoor connectors for Trimble GPS receiver
Item
Manufacturer
Part number
12 way circular connector Deutsch IMC26-2212X
Size 22 crimp socket Deutsch 6862-201-22278
Crimp tool Daniels Manufacturing Corp MH860
Positioner Daniels Manufacturing Corp 86-5
Insertion / extraction tool Deutsch 6757-201-2201
Adaptor Deutsch IMC2AD
Self amalgamating tape
Page 2-49