User's Guide Part 1

Chapter 1: Product description Overview of the PTP 700 Series
Typical bridge deployment
The PTP 700 is an “all outdoor” solution consisting of a wireless bridge between two sites.
Each site installation consists of a PTP 700 Connectorized outdoor unit (ODU) or a PTP 700
Connectorized+Integrated ODU, and a power injector (PSU) (Figure 1). The ODU provides the
following interfaces:
• PSU port: This provides proprietary power over Ethernet and connection to the
management and/or data networks via 100BASE-TX or 1000BASE-T Ethernet. In the basic
configuration, this is the only Ethernet connection to the ODU.
• SFP port: This provides an optical or copper Gigabit Ethernet interface for customer data
and/or network management.
• Aux port: This provides an optional power and 100BASE-TX or 1000BASE-T Ethernet
connection to an IEEE803.2at device such as a video camera or wireless access point.
Figure 1
PTP 700 typical bridge deployment
Page 1-4