Manualshelf

User's Manual

ManualsBrandsCambium Networks ManualsElectronics5GHz Point to MultiPoint Multi User MIMO Access Point
12345678910
Chapter 6: Installation
Installing external antennas to a connectorized ODU
Page 6-44
2
Attach the upper and lower bracket of the antenna to the mount point by closing the rear
strap around the pole.
Note
Before mounting the radio on the pole, secure the upper and lower bracket
assemblies with a torque setting of 3 to 4 Nm as shown in Figure 1 . Also,
ensure that inner strap of upper bracket is set to zero degree marking.
Figure 90 Attaching radio mounting PMP 450i AP 900 MHz antenna to the pole
1
2
3
Rear strap
Rear strap
Inner strap