Manualshelf

User's Manual

ManualsBrandsCambium Networks ManualsElectronics5GHz Point to MultiPoint Multi User MIMO Access Point
61626364656667686970
Chapter 7: Configuration
Configuring IP and Ethernet interfaces
Page 7-35
IP interface with NAT enabled - SM
The IP page of SM with NAT enabled is explained in Table 98.
Table 98 IP attributes - SM with NAT enabled
Attribute
Meaning
IP Address
Assign an IP address for SM/BHS management through Ethernet access
to the SM/BHS. Set only the first three bytes. The last byte is
permanently set to 1. This address becomes the base for the range of
DHCP-assigned addresses.
Subnet Mask
Assign a subnet mask of 255.255.255.0 or a more restrictive subnet
mask. Set only the last byte of this subnet mask. Each of the first three
bytes is permanently set to 255.