User's Manual

Chapter 7: Configuration
Configuring IP and Ethernet interfaces
Page 7-60
Table 110 SM PPPoE attributes
Attribute
Meaning
Access Concentrator
An optional entry to set a specific access concentrator to connect to for
the PPPoE session. If this is blank, the SM will accept the first access
concentrator which matches the service name (if specified). This is
limited to 32 characters.
Service Name
An optional entry to set a specific service name to connect to for the
PPPoE session. If this is left blank the SM will accept the first service
option that comes back from the access concentrator specified above, if
any. This is limited to 32 characters.
Authentication Type
None means that no PPPoE authentication is implemented
CHAP/PAP means that CHAP authentication is attempted first, then PAP
authentication. The same password is used for both types.
User Name
This is the CHAP/PAP user name that is used if CHAP/PAP authentication
is selected. If None is selected for authentication then this field is
unused. This is limited to 32 characters.
Password
This is the CHAP/PAP password that is used if PAP authentication is
selected. If None is selected for authentication then this field is unused.
This is limited to 32 characters.
MTU
Use MTU Received from PPPoE Server causes the SM to use the MRU of
the PPPoE server received in LCP as the MTU for the PPPoE link.