User's Manual

Chapter 7: Configuration
Configuring cnMaestroTM Connectivity
Page 7-211
Configuring cnMaestro
TM
Connectivity
450 Platform Family network can be onboarded, configured and managed using cnMaestro™
Cloud or On Premises Server.
Onboarding
Onboarding can be done in one of several ways:
 Using Cambium ID and Onboarding key
 Using Manufacturer’s Serial Number (Only if it starts with an “M” and is 12 characters long)
 On Premises Zero Touch onboarding of AP/SM using DHCP option 43 and 15
 PMP SM Zero touch onboarding to the cnMaestro server where PMP AP is onboarded.
To configure the PMP devices, enable Remote Management under Configuration->cnMaestro as
shown in Table 169.
Table 169 Configuring cnMaestro
Attribute
Meaning
Remote
Management
This field enables/disables remote management of 450 Platform Family
products.
cnMaestro URL
This field allows to enter cnMaestro URL e.g.
https://cloud.cambiumnetworks.com
Or cnMaestro on premises URL
Connection Status
This field indicates cnMaestro connectivity status.
Cambium ID
This field allows to enter Cambium ID for onboarding 450 Platform
devices.
Onboarding Key
This field allows to enter Onboarding Key for onboarding.
AccountID
This field indicates Account ID of the customer.