User's Manual

Chapter 7: Configuration
Configuring cnMaestroTM Connectivity
Page 7-212
Device Agent
Version
This field shows device agent version.
Prerequisites for onboarding to cnMaestro™
 Devices types must be PMP 450m Series, PMP/PTP 450 Series, PMP/PTP 450i Series or PMP
430 Series SMs (interoperability mode only).
 Minimum required software version of 14.2.1. Device software images can be downloaded
from http://support.cambiumnetworks.com or from the On Premises cnMaestro server by
navigating to Operate >Software Update->Manage Images. Select
 Device type to display the available images and then click the download icon as shown in
Figure 141.
Figure 141 Software Upgrade from cnMaestro™
 IP connectivity between PMP Device and the cnMaestro server is established. Ensure Port 443
is open in the firewall as this port is used for secure communication between the PMP device
and the cnMaestro server through web sockets. In addition, if the PMP device and cnMaestro™
server are on different subnets, proper routes should be established for communication.
 For PMP AP, a valid DNS setting is required so that the AP will be able to resolve the
cnMaestro URL. DNS settings can be verified by performing a DNS lookup under Tools->DNS
Test on the AP as shown in Figure 142.