User's Manual

Chapter 7: Configuration
Configuring cnMaestroTM Connectivity
Page 7-215
Figure 144 Example cnMaestro™ screenshot
For more information on these tools please see
http://community.cambiumnetworks.com/t5/cnMaestro/How-to-use-the-cnMaestro-Tools-for-
Troubleshooting-Device-or/m-p/54503#U54503
Zero Touch on boarding of the PMP SMs when the corresponding AP is
on boarded
First a link should be established between the PMP AP and SM either by configuring manually or
using the ICC. Once the AP and SM link is established, the AP must be onboarded to cnMaestro™
using one of several ways detailed above under the Onboarding section. Once the AP is
onboarded to cnMaestro™ Cloud or On premises cnMaestro™server, the SMs under the AP will
automatically onboard to cnMaestro™ using a Zero touch token that is communicated between the
AP and SMs. This is applicable to existing SMs registered to the AP as well as new SMs registering
to the AP for the first time. The SMs appear on the onboarding queue of cnMaestro™ and the
operator must “Approve” the devices in order to manage them.
The following operations for PMP Devices are available on
cnMaestro™
 Monitor the device details in the Dashboard page by navigating to the Monitor >Dashboard
menu and selecting the PMP AP/SM in the tree.
 Monitor notifications related to the PMP AP/SM by navigating to the Monitor >Notifications
Menu and selecting the PMP AP/SM in the tree.
 Monitor device statistics on the statistics page by navigating to the Monitor >Statistics menu
and selecting the PMP AP/SM in the tree, then selecting the PMP AP or PMP SM in the Device
type dropdown.
 Monitor Performance graphs related to the PMP AP/SM by navigating to the Monitor
>Performance menu and selecting the required performance graph (i.e Throughput, SMs,
Modulation) and selecting the PMP AP/SM in the tree.
 Troubleshoot the device on the Troubleshooting page by navigating to the Monitor >Tools
menu and selecting the PMP AP/SM in the tree.