User's Manual

Chapter 7: Configuration
General configuration
Page 7-84
Caution
This parameter governs the timeout interval, even if a
router in the system has a longer timeout interval. The
default value of this field is 25 (minutes).
An inappropriately low Bridge Entry Timeout setting may
lead to temporary loss of communication with some end
users.
Bridging
Functionality
See Table 113 General page attributes – PMP 450i AP on page 7-70
Frame Timing Pulse
Gated
If this BHS extends the sync pulse to a BH master or an BHM, select
either
Enable—If this BHS loses sync from the BHM, then do not propagate a
sync pulse to the BH timing master or other BHM. This setting prevents
interference in the event that the BHS loses sync.
Disable—If this BHS loses sync from the BHM, then propagate the sync
pulse to the BH timing master or other BHM.
Multicast Destination
Address
See Table 113 General page attributes – PMP 450i AP on page 7-70
Latitude
Longitude
Height
See Table 113 General page attributes – PMP 450i AP on page 7-70
PMP/PTP 450 Series
Note
Refer Table 113 and Table 114 for PMP 450 AP/SM General page parameters details.