User's Manual

Chapter 7: Configuration
Configuring Unit Settings page
Page 7-89
Configuring Unit Settings page
Applicable products
PMP :

AP

SM
PTP:

BHM

BMS
The Unit Settings page of the 450 Platform Family contains following options:
 Unit-Wide Changes
 Download Configuration File
 Upload and Apply Configuration File (for AP and BHM)
 LED Panel Settings (for SM and BHS)
Note
LED Panel setting is applicable for SM and BHS only.
Upload and Apply Configuration File attributes are not supported for SM and BHS.
The 450 Platform Family also supports import and export of configuration from the
AP/BHM/SM/BHS as a text file. The configuration file is in JSON format. The logged in user must
be an ADMINISTRATOR in order to export or import the configuration file.
The exported configuration file contains the complete configuration including all the default
values. To keep a backup of the current configuration, the file can be saved as-is and imported
later.
The configuration file supports encrypted password. The exported configuration file will contain
encrypted password. The import of configuration can have either encrypted or plain text password
in Configuration fie. A new tab Encrypt the Password is added under Encrypted Password tab to
generate encrypted password for a given password.
The Import and Export procedure of configuration file is described in Import and Export of config
file on page 7-209.
LED Panel Mode has options select Revised mode and Legacy mode. The Legacy mode configures
the radio to operate with standard LED behavior.