Installation Guide

Chapter 3: Operation System statistics
Page
3-82
Ultra High Priority The number of downlink data slots used for ultra high priority
downlink traffic.
Note: The above Low, Medium, High, and Ultra High Priority Counts are physical slot transmissions.
For MU-MIMO scheduling, some transmissions can contain data from more than 1 data channel
priority. In those cases, the highest data channel used is "counted" in these statistics, and the
other data channels are not, to avoid overcounting.
Broadcast & Multicast The number of downlink data slots used for broadcast and multicast
traffic.
Authentication and
Configuration
The number of slots used for registration and control message
transmissions
Registration and control The number of slots used for Authentication and Configuration
transmissions.
MAC Acknowledgements The number of downlink data slots used as ACKs.
Contention Slots Average
Per Frame
It is the average number of contention slots in a frame for the last
duration. Duration is 1/5/15 mins.
Bandwidth Requests
Received
This indicates the number of Bandwidth Requests received from
SMs.
Bandwidth Requests
Missed
This indicates how many of Bandwidth Requests are colliding.
Total This indicates the sum of all downlink data slots used in the
configured interval.
Frame Utilization
Downlink This indicates the percentage of downlink data slots used against
the maximum number of slots possible in the configured interval.
Uplink This indicates the percentage of uplink data slots used against the
maximum number of uplink slots possible in the configured interval.