Installation Guide

Chapter 4: Reference information Equipment specifications
Page
4-33
Specifications for PMP/PTP 450b High Gain Series - SM
The PMP/PTP 450b High Gain SM conforms to the specifications listed in Table 162.
Table 162 PMP/PTP 45
0b High Gain Series - SM specifications
Category
Specification
Model Number PMP 450b High Gain SM
Spectrum
Channel Spacing Configurable in 2.5 MHz increments
Frequency Range 4900 - 5925 MHz
Channel Bandwidth 5, 10, 15, 20, 30, and 40 MHz
Interface
MAC (Media Access
Control) Layer
Cambium Proprietary
Physical Layer 2x2 MIMO OFDM
Ethernet Interface 100/1000BaseT, half/full duplex, rate auto negotiated
(802.3 compliant)
Protocols Used IPv4, UDP, TCP, IP, ICMP, Telnet, SNMP, HTTP, FTP
Network Management HTTP, HTTPS, Telnet, FTP, SNMP v2c and v3
VLAN 802.1ad (DVLAN Q-in-Q), 802.1Q with 802.1p priority,
dynamic port VID
Sensitivity
Nominal Receive
Sensitivity (w/ FEC) @ 5
MHz Channel
4.9 GHz 1x = -92.5 dBm, 2x = -88.5 dBm, 4x = -81 dBm, 6x = -74.2
dBm, 8x = -66 dBm
5.1 GHz 1x = -93 dBm, 2x = -89.1 dBm, 4x = -81.5 dBm, 6x = -74.8
dBm, 8x = -67.4 dBm
5.2 GHz 1x = -92 dBm, 2x = -88.3 dBm, 4x = -80.8 dBm, 6x = -74
dBm, 8x = -66.2 dBm
5.4 GHz 1x = -93 dBm, 2x = -89.1 dBm, 4x = -81.5 dBm, 6x = -74.8
dBm, 8x = -67.4 dBm
5.8 GHz 1x = -92 dBm, 2x = -88.3 dBm, 4x = -80.8 dBm, 6x = -74
dBm, 8x = -66.2 dBm
4.9 GHz 1x = -90.2 dBm, 2x = -85.2 dBm, 4x = -78.8 dBm, 6x = -71.4
dBm, 8x = -64.5 dBm