Installation Guide

Chapter 4: Reference information Equipment specifications
Page
4-38
Specifications for PMP 450 Series - AP
The PMP 450 AP conforms to the specifications listed in Table 163.
Table 163 PMP 450 Series - AP specifications
Category
Specification
Model Number PMP 450 AP
Spectrum
Channel Spacing 5, 7, 10, 15, 20 and 30 MHz Channel Bandwidth
Configurable on 2.5 MHz increments
Frequency Range 2.4 GHz 2400 – 2483.5 MHz
3.5 GHz 3300 – 3600 MHz
3.65 GHz 3500 – 3850 MHz
5 GHz 5470 – 5875 MHz
Channel Bandwidth 3.5 and 3.65 GHz 5, 7, 10, 15, 20 and 30 MHz
2.4 and 5 GHz 5, 10, 15, 20 and 30 MHz
OFDM Subcarriers 512 FFT
Interface
MAC (Media Access
Control) Layer
Cambium Proprietary
Physical Layer 2x2 MIMO OFDM
Ethernet Interface 10/100/1000BaseT, half/full duplex, rate auto
negotiated (802.3 compliant)
Protocols Used IPv4, UDP, TCP, IP, ICMP, Telnet, SNMP, HTTP, FTP,
TFTP, RADIUS
Network Management HTTP, HTTPS, Telnet, FTP, SNMP v3, TFTP, Syslog
VLAN 802.1ad (DVLAN Q-in-Q), 802.1Q with 802.1p priority,
dynamic port VID
Sensitivity
Nominal Receive
Sensitivity (w/ FEC) @
5 MHz Channel
2.4 GHz 1x = -92 dBm, 2x = -87.8 dBm, 4x = -80.4 dBm, 6x = -
74.4 dBm, 8x = -66.5 dBm
3.5 GHz 1x = -92.4 dBm, 2x = -88.3 dBm, 4x = -81.3 dBm, 6x = -
75.3 dBm, 8x = -67.7 dBm