Installation Guide

Chapter 4: Reference information Equipment specifications
Page
4-43
Specifications for PMP 450 Series - SM
The PMP 450 SM conforms to the specifications listed in Table 164.
Table 164 PMP 450 Series - SM specifications
Category
Specification
Model Number PMP 450 SM
Spectrum
Channel Spacing 5, 7, 10, 15, 20, 30, and 40 MHz Channel Bandwidth
Configurable on 2.5 MHz increments
Frequency Range 900 MHz 902 – 928 MHz
2.4 GHz 2400 – 2483.5 MHz
3.5 GHz 3300 – 3600 MHz
3.65 GHz 3500 – 3850 MHz
5 GHz 5470 – 5875 MHz
Channel Bandwidth 900 MHz, 5, 7, 10, 15, and 20 MHz
2.4 GHz, 3.5 GHz,
3.65 GHz and 5
GHz
5, 10, 15, 20, 30, and 40 MHz
Note
2.4 GHz band does not support 40 MHz.
OFDM Subcarriers 512 FFT
Interface
MAC (Media Access Control) Layer Cambium Proprietary
Physical Layer 2x2 MIMO OFDM
Ethernet Interface 10/100 BaseT, half/full duplex, rate auto negotiated
(802.3 compliant)
Protocols Used IPv4, UDP, TCP, IP, ICMP, Telnet, SNMP, HTTP, FTP
Network Management HTTP, HTTPS, Telnet, FTP, SNMP v3
VLAN 802.1ad (DVLAN Q-in-Q), 802.1Q with 802.1p priority,
dynamic port VID
Sensitivity