Installation Guide

Chapter 2: Tools Using the Alignment Tool
Page
2-334
Power
: This field indicates the current receive power level (vertical channel)
for the frequency configured in parameter
Radio Frequency.
Users
: This field indicates the number of SMs currently registered to the AP
which is transmitting the beacon information.
ESN
: This field indicates the MAC, or hardware address of the AP/BHM
which is transmitting the beacon information.
Color Code
: This field displays a value from 0 to 254 indicating the AP’s
configured color code. For registration to occur, the color code of the SM
and the AP must match. Color code is not a security feature. Instead, color
code is a management feature, typically for assigning each sector a different
color code.
Color code allows you to force a SM to register to only a specific AP, even
where the SM can communicate with multiple APs. The default setting for
the color code value is 0. This value matches only the color code of 0 (not all
255 color codes).
Multipoint or Backhaul
: this field indicates type of configuration - point-
Multipoint (PMP) or Backhaul (PTP).