Installation Guide

Chapter 3: Operation System information
Page
3-4
Attribute
Meaning
Device Type This field indicates the type of the module. Values include the frequency
band of the device, its module type and its MAC address.
Board Type This field indicates the series of hardware.
Product Type The field indicates model number of 450m device. The 450m Series has two
model variants.
• PMP 450m: This model works in SU-MIMO mode which is default
“limited” mode. The MU-MIMO license can be purchased from Cambium
Networks and applied.
MU-MIMO: This model works in MU-MIMO mode.
Software Version This field indicates the system release, the time and date of the release and
whether communications involving the module are secured by AES
encryption. If you request technical support, provide the information from
this field.
Bootloader Version This field indicates the version of Uboot running on the 450m AP platform.
CPU Usage This field indicates the current CPU utilization of the device.
Board MSN This field indicates the Manufacturer’s Serial number. A unique serial number
assigned to each radio at the factory for inventory and quality control.
Board Model This field indicates the Manufacturer’s Model number. A unique serial number
assigned to each for inventory and quality control.
FPGA Version This field indicates the version of the field-programmable gate array (FPGA)
on the module. If you request technical support, provide the value of this
field.
Uptime This field indicates how long the module has operated since power was
applied.
System Time This field provides the current time. If the AP is connected to a CMM4, then
this field provides GMT (Greenwich Mean Time). Any SM that registers to the
AP inherits the system time.
Main Ethernet
Interface
This field indicates the speed and duplex state of the Ethernet interface to
the AP.