Installation Guide

Chapter 3: Operation System information
Page
3-7
Site Name This field indicates the name of the physical module. You can assign or
change this name in the SNMP tab of the AP Configuration page. This
information is also set into the sysName SNMP MIB-II object and can be
polled by an SNMP management server.
Site Contact This field indicates contact information for the physical module. You can
provide or change this information in the SNMP tab of the AP Configuration
page. This information is also set into the sysName SNMP MIB-II object and
can be polled by an SNMP management server.
Site Location This field indicates site information for the physical module. You can provide
or change this information in the SNMP tab of the AP Configuration page.
MU-MIMO Mode This field displays information about MU-MIMO mode. If AP is keyed as MU-
MIMO, it will display “MU-MIMO” (Multi User - MIMO) otherwise it will display
“SU-MIMO” (Single User - MIMO).
AES-256 Encryption
Keyed
This displays the status of the entered AES-256 Encryption Key.
Note
To enable AES-256 Encryption, a feature key needs to be
purchased.
Time Updated and
Location Code
This field displays information about the keying of the radio.