Installation Guide

Chapter 3: Operation System information
Page
3-32
RADIUS
Authentication Server
This field displays the associated RADIUS Authentication Server for each SM
where it was authenticated. This information is useful when there are
multiple RADIUS servers (maximum three servers supported by Cambium). If
one server is not reachable, other configured servers are tried in sequential
order as a fall-back. In this scenario, the Session Status is useful to identify
associate RADIUS Authentication Server for all connected SMs.
Table 124 Session Status > Configuration CIR configuration denotations
Attribute
Meaning
(SM) QoS/VLAN parameters are derived from the SM’s/BHS’s settings
(APCAP) QoS/VLAN parameters are derived from the AP’s settings, including any
keyed capping (for radios capped at 4 Mbps, 10 Mbps, or 20 Mbps)
(D) QoS/VLAN parameters are retrieved from the device, due to failed retrieval
from the AAA or WM server.
(AAA) QoS/VLAN parameters are retrieved from the RADIUS server
(BAM) QoS/VLAN parameters are retrieved from a WM BAM server