Installation Guide

Chapter 3: Operation System information
Page
3-34
Subscriber See Table 120 on page 3-24.
LUID See Table 120 on page 3-24.
Link Quality Indicator This field displays quality of the link. It is calculated based on receive power,
modulation rate, re-registrations and beacon percentage.
Downlink - Quality
Index
This field displays the downlink quality in percentage. It is calculated based
on Downlink receiver power, modulation rate, and beacon percentage.
Downlink -Actual
Average Rate
This field displays the average Downlink modulation rate. For 450m, this
field specifies the SU-MIMO Modulation Rate. When Rate based LQI is
selected, only actual rate and expected rate will be displayed.
Downlink -Actual
Average EVM
This field displays the average Downlink EVM rate.
Downlink - Expected
Rate
This field displays the expected modulation rate based on receive power in
Downlink. When EVM based LQI is selected, only actual EVM and expected
EVM will be displayed.
Downlink - Beacon
Quality Index
This field displays the beacon quality index. It is calculated based on beacon
percentage.
Downlink - Beacon % This field displays the received beacon percentage.
Uplink - Quality Index This field displays the uplink quality in percentage. It is calculated based on
Uplink receiver power and modulation rate.
Uplink -Actual
Average Rate
This field displays the average Uplink modulation rate.
Uplink -Actual
Average EVM
This field displays the average Uplink EVM rate.
Uplink - Expected
Rate
This field displays the expected modulation rate based on receive power in
Uplink.
Re-Reg - Quality
Index
This field displays the re-registration quality. It is calculated based on the re-
registration count.
Re-Reg Count This field displays the number of re-registrations.
Uptime This field displays the uptime of the device.