User's Manual

Chapter 10: Reference Information
Equipment specifications
Page 10-17
Specifications for PMP 450 Series - AP
The PMP 450 AP conforms to the specifications listed in Table 233.
Table 233 PMP 450 Series - AP specifications
Category
Specification
Model Number
PMP 450 AP
Spectrum
Channel Spacing
5, 7, 10, 15, 20 and 30 MHz Channel Bandwidth
Configurable on 2.5 MHz increments
Frequency Range
2.4 GHz
2400 – 2483.5 MHz
3.5 GHz
3300 – 3600 MHz
3.65 GHz
3500 – 3850 MHz
5 GHz
5470 – 5875 MHz
Channel Bandwidth
3.5 and 3.65 GHz
5, 7, 10, 15, 20 and 30 MHz
2.4 and 5 GHz
5, 10, 15, 20 and 30 MHz
OFDM Subcarriers
512 FFT
Interface
MAC (Media Access
Control) Layer
Cambium Proprietary
Physical Layer
2x2 MIMO OFDM
Ethernet Interface
10/100/1000BaseT, half/full duplex, rate auto
negotiated (802.3 compliant)
Protocols Used
IPv4, UDP, TCP, IP, ICMP, Telnet, SNMP, HTTP, FTP,
TFTP, RADIUS
Network Management
HTTP, HTTPS, Telnet, FTP, SNMP v3, TFTP, Syslog
VLAN
802.1ad (DVLAN Q-in-Q), 802.1Q with 802.1p
priority, dynamic port VID
Sensitivity
Nominal Receive
Sensitivity (w/ FEC) @
5 MHz Channel
2.4 GHz
1x = -92 dBm, 2x = -87.8 dBm, 4x = -80.4 dBm, 6x =
-74.4 dBm, 8x = -66.5 dBm
3.5 GHz
1x = -92.4 dBm, 2x = -88.3 dBm, 4x = -81.3 dBm, 6x
= -75.3 dBm, 8x = -67.7 dBm