User's Manual

Chapter 9: Operation
System information
Page 9-23
Both the LUID and the MAC are hot links to open the
interface to the SM/BHS. In some instances, depending on
network activity and network design, this route to the
interface yields a blank web page. If this occurs, refresh
your browser view.
Site Name indicates the name of the SM/BHS. Change this name on the
Configuration web page of the SM/BHS. This information is also set into
the sysName SNMP MIB-II object and can be polled by an SNMP
management server.
Hardware
This field displays the SMs or BHS hardware type.
Software Version
This field displays the software release that operates on the SM/BHS, the
release date and time of the software.
FPGA Version
This field displays the version of FPGA that runs on the SM/BHS
State
This field displays the current status of the SM/BHS as either
 IN SESSION to indicate that the SM/BHS is currently registered to
the AP/BHM.
 IDLE to indicate that the SM/BHS was registered to the AP/BHM at
one time, but now is not.
This field also indicates whether the encryption scheme in the module is
enabled.
Session tab
The Session tab provides information on the SMs or BHS Session Count, Reg Count, Re-Reg
Count, Uptime, Air delay, PPPoE State and Timeouts.
Table 200 Session tab attributes
Attribute
Meaning
Subscriber
See Table 199 on page 9-22.