User's Manual

Chapter 10: Reference Information
Equipment specifications
Page 10-2
Equipment specifications
This section contains specifications of the AP, SM, BHM and BHS associated supplies required for
450 Platform Family installations.
Specifications for PMP 450m Series - AP
The PMP 450m AP conforms to the specifications listed in Table 229.
Table 229 PMP 450m Series - AP specifications
Category
Specification
Model Number
PMP 450m AP
Spectrum
Channel Spacing
Configurable on 2.5 MHz increments
Frequency Range
5150 to 5925 MHz
Channel Bandwidth
20 MHz
Interface
MAC (Media Access
Control) Layer
Cambium Proprietary
Physical Layer
14x14 Multi-User MIMO OFDM
Ethernet Interface
100/1000BaseT, half/full duplex, rate auto negotiated
(802.3 compliant)
Protocols Used
IPv4, UDP, TCP, IP, ICMP, Telnet, SNMP, HTTP, FTP
Network Management
HTTP, HTTPS, Telnet, FTP, SNMP v3
VLAN
802.1ad (DVLAN Q-in-Q), 802.1Q with 802.1p priority,
dynamic port VID
Sensitivity
Nominal Receive
Sensitivity (w/ FEC) @
20 MHz Channel
5.8 GHz
1x = - 93.5 dBm, 2x = -88.6 dBm, 4x = -81.5 dBm, 6x = -
75.9.0 dBm, 8x = -67.8 dBm
5.4 GHz
1x = - 93.0 dBm, 2x = -88.2 dBm, 4x = -82.1 dBm, 6x = -
76.0 dBm, 8x = -68.2 dBm
Performance