User's Manual

Should it be necessary to disconnect the PIDU Plus to ODU cable at the ODU this can be

achieved by removing the weather proofing gland and depressing the RJ45 locking tab with a

small screwdriver as shown below:

Figure 21 - Disconnecting the ODU

Warning: Ensure that power is removed from the system at the PIDU Plus to prevent damage

to the ODU while making or breaking the connection.

7.7.3 Routing the Cable

After connecting the cable to the ODU it can be routed and secured using standard cable

routing and securing techniques. When the cable is in place it can then be cut to the desired

length at the PIDU Plus prior to connection to the PIDU Plus.

7.7.4 Fitting A Surge Arrestor

If you have opted to fit a Surge Arrestor, this should be installed by following the

manufacturer’s instructions. For recommended types see Section 11 “Lightning Protection”