User's Guide Part 2

Upgrading the PTP 600 Chapter 6 Operation
phn-0896_009v003
6-80
UNDER DEVELOPMENT
Feb 2010
Entering a license key
Perform this task to enter a new license key (when upgrading licensed capabilities).
Before starting this task, ensure that the license key is available. If it is necessary to
upgrade the licensed capabilities of an existing unit, then perform the following tasks
first:
• Checking capability summary on
page 6-77
• Using access keys to gener
ate a new license key on page 6-79
To upgrade the unit to a new license key, proceed as follows:
Procedure 6-3 Upgrade unit to a new license key
1
From the left hand menu, select License Key. The Software License Key page is
displayed (
Figure 6-41).
2
Enter the new License Key.
3
Select Validate license key. If the license key is valid, the Reboot Wireless Unit
dialog is displayed (Figure 6-42).
4
Select Reboot Wireless Unit. The Reboot Confirmation dialog is displayed (
Figure
6-43
).
5
Select OK. The reboot progress message is displayed. On completion, the unit
restarts with the new license key.
Figure 6-42 Reboot Wireless Unit dialog
Figure 6-43 Reboot Confirmation dialog