User's Guide Part 2

User Guide: PTP 600 Series Managing faults
phn-0896_009v003
Feb 2010
UNDER DEVELOPMENT
6-117
SMTP Source Email Address
The email address used by the PTP 600 Series to log into the SMTP server. This must
be a valid email address that will be accepted by your SMTP Server.
SMTP Destination Email Address
The email address to which the PTP 600 Series will send the alert messages.
SNTP (Simple Network Time Protocol)
The SNTP client allows the PTP 600 Series to obtain accurate date and time updates
from a networked timeserver. The system time is used for SNMP and event logging.
SNTP State
When enabled, the Remote Management web page permits the following attributes to
be set:
SNTP IP Address
The IP address of the networked SNTP server.
SNTP Port Number
The port number of the networked SNTP server. By convention the default value for
the port number is 123.
SNTP Poll Interval
The period at which the SNTP client polls the server for time correction updates.
Default 1 hour. If for any reason an SNTP poll fails, the client will automatically
perform 3 retries before waiting for the user defined poll period.
Time Zone
The time zone is a fixed offset from GMT that is added to the SNTP time to allow the
expression of time in all geographic time zones.
Daylight Saving
Allows a fixed offset of one hour to be added to the SNTP time in order to reflect the
local daylight saving time.