User's Guide Part 2

Managing faults Chapter 6 Operation
phn-0896_009v003
6-118
UNDER DEVELOPMENT
Feb 2010
Setting the clock
The PTP 600 Series has a system clock which can be used to supply accurate date and
time information in the absence of a SNTP server. The system clock is battery backed
and will continue to operate for several days if the PTP 600 Series has been switched
off.
SNTP State
If the SNTP State is set to “Disabled”, see Figure 6-64, then the Remote Management
web p
age allows the following attributes to be set:
Set Time
Shows the current time in 24 hour mode. The three editable fields display hours
minutes and seconds.
Set Date
Displays the current date. The year, month and day can be set using the drop-down
selection boxes.
Time Zone
See Setting the clock on
page 6-118.
Daylight Saving
See Setting the clock on
page 6-118.