User's Guide Part 2

Using recovery mode Chapter 7 Troubleshooting
phn-0896_009v003
7-22
UNDER DEVELOPMENT
Feb 2010
Reboot
This allows the user to reboot the unit. This option must be executed after resetting
the IP & Ethernet configuration or erasing the configuration detailed above.
Software Version
This is the software version of the recovery operating system permanently installed
during manufacture.
Recovery Reason
Indicates the reason the unit is operating in Recovery mode. Possible reasons are
“Recovery button active” or “Invalid or corrupt image”
MAC Address
The MAC address shown here is the MAC address of the unit programmed during
manufacture.
Upgrade software image
The first step (Figure 7-7) is to use the ‘Browse’ button to locate the software image to
be downloaded. Once located the user should press the “Upgrade Software Image”
button to start the software download process.
During software download, progress is indicated by a pair of progress bars (Figure
7-8).
Fi
gure 7-8 Upgrade Progress Tracker page
When the download is complete a page is displayed indicating the status of the
software download (Figure 7-9).