User's Guide Part 2

Cable connection procedures Chapter 5 Installation
phn-0896_009v003
5-16
UNDER DEVELOPMENT
Feb 2010
Connecting the drop cable to an ODU or LPU
NOTE
This procedure contains illustrations of an ODU, but it applies in principle to
both the ODU and the LPU.
To connect the supported Superior Essex cable with a gland to a unit (LPU or ODU),
proceed as follows:
Procedure 5-8 Connect the drop cable with a gland to a unit (LPU or ODU)
1
Insert the RJ45 plug into the socket in the unit, making sure that the locking tab
snaps home.
2
Support the drop cable and gently hand screw the gland body into the unit until
the O ring seal is flush to the unit body.
NOTE
Do not fit the back shell prior to securing the gland body.