Manualshelf

User's Guide Part 2

ManualsBrandsCambium Networks ManualsElectronicsWireless Ethernet Bridge
61626364656667686970
User Guide: PTP 600 Series Installing the GPS receiver for PTP-SYNC
phn-0896_009v003
Feb 2010
UNDER DEVELOPMENT
5-31
Procedure 5-11 Connect drop cable to Trimble GPS receiver
1
Prepare the drop cable end as follows:
Bare back the cable outer and copper screen to 50mm.
Bare back the cable inner to 17mm.
Un-twist the cable pairs.
Strip the individual conductors to 5mm.
2
Fit the adaptor outer, associated boot, and boot insert.