User's Guide Part 2

User Guide: PTP 600 Series Installing PTP-SYNC
phn-0896_009v003
Feb 2010
UNDER DEVELOPMENT
5-37
Rack mount installation kit
The PTP800 CMU / PTP-SYNC 19” rack mount installation kit (Figure 5-13) is an
optional item that must be purchased separately, if required. This kit contains the
following components:
• 1 x rack bracket
• 8 x M3 washers
• 8 x M3 screws
• 1 x rack mount blank plate
• 8 x M5 nuts
• 8 x M5 washers
• 2 x rack handles
Figure 5-13 PTP800 CMU / PTP-SYNC 19” rack mount installation kit
NOTE
Ethernet cables are not provided as part of the PTP-SYNC product or as part
of the GPS Module Kit.
PTP-SYNC unit rack or wall mounting
The PTP-SYNC unit can either be rack mounted indoors or wall mounted indoors.
Rack mounted
Securing screws for PTP-SYNC within the rack mount are fitted to the underside
(Figure 5-14).