User's Guide Part 2

Installing PTP-SYNC Chapter 5 Installation
phn-0896_009v003
5-40
UNDER DEVELOPMENT
Feb 2010
5
Use the supported Superior Essex cable (refer to
Cables and connectors on
page 1-15) to connect the cable between the PTP-SYNC and the LPU or ODU.
6
This is a setup for clustered PTP-SYNC units (single GPS timing source with
multiple PTP-SYNC units or ODU systems). Use an un-screened CAT5e Ethernet
cable and connect the cable between PTP-SYNC units.