User's Guide Part 2
User Guide: PTP 600 Series Establishing a radio link
phn-0896_009v003
Feb 2010
UNDER DEVELOPMENT
5-63
Disarm on completion
When the alignment process is complete, disarm
both units in the link, as described in
Installation pages on page 6-51. Th
is is necessary in order to:
• Turn off the audible alignment aid (see Disarm installationon page 6-72)
• Enable
Adaptive Modulation
• Fully enable Advanced Spectrum Management with i-DFS
• Clear unwanted installation information from the various systems statistics
• Store the link range for fast link acquisition on link drop
• Enable higher data rates
NOTE
After 24 hours, the units will be disarmed automatically, provided that they
are armed and that the link is up.